[jgriffi]

Hi,
Thanks for the replies. Both lights look the same. So they both seem to be working ok?

 

[jgriffi]

Will try tomorrow, thanks very much

 

[jgriffi]

Hello, sorry for the delay in replying. I have checked all my lights and a mechanic also confirmed all the lights are working ok. So sound like a ECU error? Is there any way to correct this without have to pay for diagnostic equipment to remove the error.
Thanks very much

 

[jgriffi]

No, have not tried that. Will try tomorrow morning. Thanks

 

[jgriffi]

Hi,
I am not able to turn on the indicator lights if the ignition is not on?
I checked all the hazard lights and they are ok
Any ideas?
Cheers

 

[jgriffi]

Hi, have checked in the manual and it says that with the ignition off, if you push the indicators switches past the pressure point, then up turns on the right hand side parking lights (for if you leave it in a dark street) and down is the left hand side. I have tried this and it works. It turns on 2 lights on the front. One time I tried on the left hand side lights was not on, so i tapped the light and it came on. As this is the error message - "front parking light failure", I wonder if the light has a loose wire or something, causing the error message. All other times the lights work ok, but I still get the error message.
Could it be a loose wire?

Thanks everyone for your help.
Jo

 

[jgriffi]

Thanks very much for you help. After fiddling around today, the light is staying on ok when I test it and error message seems to be gone. May have been i just slightly moved something and all connections etc now ok. If error message does reappear I will take to a garage to clear the message.

Thanks again.

 

[jgriffi]

Thank you - issue all resolved