BMW Forums : BimmerForums banner
1 - 2 of 2 Posts

·
Platinum BFuk Member
Joined
·
637 Posts
Discussion Starter · #1 ·
Hi All

just joined the site earlier today, just need some advice about short shifts, can i get one for my 325td i have tried the ones from ebay but they hit the prop shaft

hope someone can advise me

Thanks Sam
 

·
BFuk Legend
Joined
·
11,712 Posts
You can use the shifter from a z3 1.9 using genuine bmw parts, the shift is really nice. Its not so short to be a pain on the road but takes the massive swing out of the gear lever. This shouldnt touch the prop as you are using genuine BMW parts.
Here are the part numbers that you will need:
25.11.7.527.252 Shift lever £33.19
25.11.1.220.600 Shifter Pivot Bush £5.49
25.11.7.571.899 Shift Lever Clip 31p

I used an ebay shifter and wished i hadnt bothered, this is a much better conversion and from what i understand fit nearly all BMW's.
Hope this helps mate :thumbsup
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top