BMW Forums : BimmerForums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2,119 Posts
Looking at that picture it appears there has been some loose bolts on there for a while with the way the metal around bolt holes is worn.
Removing is going to be fun due to damage at the top of the holes, if you can clean up at the top then you might get lucky carefully drilling in to the bolts and using easy outs or knocking a torx in. The bits shouldn’t be in right now the tension is off unless someone has loctited them in?
Once out run a tap down to clean threads up before replacing pulley and bolts.
 
1 - 1 of 1 Posts
Top