[M14RKH]

Sup guys , i am pretty new here so all help gratefully accepted....
I have just fitted a Kenwood KVT-729dvd.
Heres the problem. The car obviously came with bluetooth as standard , but after fitting the new stereo i have lost my bluetooth (BT) capabilities .
Firstly , the BT works but with no sound coming through audio equipment , it answers ok but just no sound in . The problem is the ability to use it through the stereo interface which has BT .
So if i use the ISO connector SBKM004will this sort the problem or do i need to buy a seperate BT device like a parrot or kenwoods own one KCAbt200.

The company who installed the stereo say it is because i use the I-Phone , is this correct or am i being fobbed off .
Thanks in advance guys ....

 

[xXNealXx]

Have you fitted it without the ISO in the first place? Or have the installation company fitted the wrong one?

 

[redadair]

you have been fobbed off big time mate - tell them to go F themselves and try and connect one of there phones with it and you will get and identical problem.

Check what Neal says, and demand they put all back the way it was if they wont fix it

 

[M14RKH]

Have you fitted it without the ISO in the first place? Or have the installation company fitted the wrong one?

Thanks for the speedy reply , i dont know with regARDS TO THE WRONG ISO.
They may have used the original one that was used when i had it fitted in the 1 series before this one . I have ordered this ISO and will fit it myself to hope it cures the problem but until it arrives and its tested ....

 

[redadair]

Good luck stomper,

It may be worth taking a few pics of what your doing so that others don't get caught out.....? If that's not too much trouble of course Red