BMW Forums : BimmerForums banner

1 - 2 of 2 Posts

1 Posts
Discussion Starter #1
had my car checked with diagnostic and come up with following faults..
differential pressure sensor , intake manifold plausibility.

camshaft sensor -intake

camshaft sensor-exhaust

all camshaft sensors failed

throttle valve adaptation abort due to environment conditions.

misfire detection , sumcheck error.

misfire - cyl. 2

misfire -cyl 3

I've been told it is probably a fault with the variable valve timing actuator.
I'm new to all this and would be grateful for any help

Thanks kev sorry about big post on my first

Super Moderator
12,946 Posts
ide say its all down to duff cam sensors myself...

change the intake sensor first its more critical than the exhaust one..

or its done the notorious jumped a tooth on the timing chain...
1 - 2 of 2 Posts