BMW Forums : BimmerForums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
163 Posts
Had a similar (same) prob decided to do all the regular things reset key,check module etc. then I just used some lube (white lithium,thats what I use on door hinges so I thought I would give it a go on plastic) on the actual door push down buttons themselves which appeared to have solved the prob,noticed that the lube had disclosed "friction" spots between the button and door trim (maybe that cause them to "seize), I must admit I don't use the "rear" doors often as in unlock via remote.But anyway it's been over 3 months and it's winter down here and all is good.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top