BMW Forums : BimmerForums banner

valve

  1. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi I found rather big coolant leak from below pictured element, which I identified as Heater Control Valve Solenoid. Anybody came across this problem before? Is it hard to replace?
  2. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi Did any of you cam across problems with Fuel tank vent valve? My engine suffering clicking noise for at least 3 years. Today I managed to find the issue. It doesn't always clicking but when it does, my god it sound so bad. When its clicking, entire valve is shaking and vibrating really...
  3. General BMW Discussions
    Hello. Just tried to get a tyre replaced and it turns out the metal core (which must still be original with probably cars original tyre) is corroded on. Well it’s stuck anyway. The tyre company said they didn’t want to force it and I should take it back to BMW. Obviously, with that in mind I’m...
  4. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi everyone I’m experiencing clutch slip occasionally has anyone on here removed the CDV to improve this problem the car is a 2.0 petrol N43 Cheers
  5. BMW 3 Series Forum - Technical Talk on the BMW E46
    hi to all I hope that some one can help me I am looking for the part number for the fuel valve Pressure Relief which is fitted to the m57 engine I do have a photo but how can I add it to this thread this valve is also fitted to the range rover L322 td6 which is the BMW m57 engine
  6. BMW Z Series - Tech Talk Z1, Z3, Z4, Z8, Z9
    I need to replace the valve cover gasket on my 2007 3.0 Si N52 engine done 60,000 miles. We have had this car for 3 years now and I have only had to change the starter motor and clean the vanos solenoids. So although I am comfortable working on the engine, I need to get all the advise that I...
  7. General BMW Discussions
    Hi. I have a BMW 320d 2007, non UK model , and the run flat warning has come on. The tyre has not gone down (the one that I think it is) and I want to check the tyre pressures and make sure they are ok. Problem is there is no sticking out valve, just a flat looking plate that looks like I...
  8. Technical Guides for BMW E24, E63, E64, F12, F13.
    I'm always surprised when members go off immediately to a mechanic when the car starts smoking on idle and when accelerating - from my own experience 50% - 60% of smoking cases are actually the Pressure Control Valves rather than the Valve Stem Seals. If you have smoking problems, do this first!
  9. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Hi Apologies if this is in the wrong place but I did search and couldnt find what I was looking for . I have 2005 120 Petrol E87 and think I need the valve stem seals replacing. I am getting blue smoke after idling upon acceleration. I have changed the Oil separator CCV Valve (under inlet...
  10. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi, I had a membrane breather issue on e92 325i 3 litre and the engine was basically whistling, i checked would there be any suction under the oil cap, there was hence as recommended I replaced the valve cover, new OEM from BMW (£330). The whistling stopped, i noticed 1.there is still still a...
  11. General BMW Discussions
    Help! I have a 2004 v12 6 litre e65 saloon, and I cannot spot the heater valve under the bonnet! I know what I am looking for, as I have replaced one on a 740, but I cannot find the valve anywhere in the v12 engine compartment. Anyone out there help me???
  12. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hey all, I need to swap out the RCG / VCG on the N42. I done this a few years back on a friends N42 also but was wondering you guys could clear up a few things; 1. Main question being regarding the use of gasket sealant. Right now the existing gasket has some on due to when the ring and seals...
  13. Tyres and Alloy Wheels Forum
    Hi, on our 2015 118i Sport, we keep getting a low tyre pressure warning, which, after going to a local garage turned out not to be the tyre but the valve stem itself. I have looked online and seen its possible (and obviously cheaper) to buy just the valve and not the complete TPMS sensor but...
  14. General BMW Discussions
    Hello, I need my intake valves cleaned. I have quotes from popular walnut blasters at £300-£350 I spoke to Birds Tuning who say they clean them "manually" which they think is better. I assume they mean brushing and scraping with intake cleaner. I am also considering doing this my self. I can...
  15. Technical Guides for the BMW X Series
    Hi all I have a 2008 3 litre diesel x5 and would love some help. My engine is making a whirring noise if I squeeze the vacuum hose coming out of the erg valve it stops. Does that mean I need to replace the erg valve? Or is the problem at the other end of the vacuum hose? Many thanks Adrian
  16. Introductions
    Hello BMW experts. Need a bit of advice. I run an M20 323i motor in my kit car. I am currently refurbing the head and replacing the cam and rockers. Valves are all good. Before I took it off the car I was experiencing valve bounce and loss of power well short of max revs so I thought I would...
  17. BMW ECU Tuning and Standalone Tuning
    Hi all Gearbox on my E65 has thrown up some faults which have been traced to a faulty valve body. Apparently it's a known fault in these. I have found a used one with warranty. We have checked with bmw dealership and donor gearbox is compatible with my car. However, I have been told that there...
  18. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi guys, I have a 2001 330ci and my engine light is on constantly. the only code in the dme Is for the tank vent valve, I replaced it with a new unit and the engine light came back, did an actuator test and its definitely working I heard it, clear the code and the light stays off until you run...
  19. BMW 3 Series Forum - Technical Talk on the BMW E46
    so I changed over the valve cover gasket but me being a n00b I cocked it up and its leaking even worse now so how the hell do you keep the ******* in position while putting the cover back on because I feel like the back left straight isn't on properly, mine always falls off and just becomes...
  20. BMW 3 Series Forum - Technical Talk on the BMW E46
    Has anybody with the N42/N46 engine had theirs done at PMP Cars and can comment on their work, please?
Top