BMW Forums : BimmerForums banner

values

  1. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi everyone. I'm having problem with my engine between 1.5 and 2k rpm on load you can hear light rattle like diesel sound i found it calls pinging in English but i call it fuel igniting to early :D So i think its related to engine timing/vanos . I tried 99 octane petrol but problem is still...
  2. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all. I’ve recently checked my smooth running values on my code reader and noticed that cylinder 5 is way out of tolerance. Also noticed the engine has a slight missfire and seems under power at times. Would this be a failing coil or injector. I’d be confident in changing the coil but id...
  3. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all . Having a lumpy idle on my 318i.59k .plugged in a c310 scanner . Had a 30ea Denox cat sulphurised fault . No engine light . Smooth running values cylinder 1-4 were: 25.2, -27.5,40.9, -40. Are these within normal range ? Additional mixture adaptation 0.36 on 1&2. Multiplicative adaption...
  4. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    hi all, new around here, and unsure if this is the right place for this post:confused also new to the world of coding and i've hit an annoying blocker, if somebody can help pls. below is a presumably standard coding, to enable comfort opening/closing with remote. I need to set this to...
  5. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    2010 E87 - 118i (UE52) NH43 - Solus Edge - Operational Smoothness Values for the fuel injectors Hi all, I had my BMW Series 1 hooked up to SOLUS Edge and looked at the Fuel Injectors "Operational Smoothness Values". I'd appreciate some help in understanding the read out. Does the reading...
  6. BMW X Series - Tech Talk For All Gen Of X Series
    Hi All, New member here and recent new owner of an E53 X5 with the 3.0 M57 engine, a long winded post but wanted to give as much info as possible in the hope someone can help - apologies if this is posted in the wrong section :embarrassed Basically I can find lots of information on getting...
  7. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Gents, I've just bought a 200k £600 525D Touring (2002). From reading, I guess this is the common rail model and should have 22mm swirl flaps. It's got this hard to start (all the time) issue where it cranks for a good 5 seconds before bursting into life. It doesn't attempt to start before...
  8. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hey guys I've been messing around with INPA recently and found an Exhaust Fume temperature sensor that doesn't want to read properly. Few question on this and i'm hoping someone can enlighten me: 1. Does anyone else have this reading? 2. Should i be worried? I found that this sensor is for...
  9. General BMW Discussions
    Hi ive never really posted on here (im not the lazy type if i search i usually find the answer without having to ask) But this is a subjective question Recently i purchashed a very good condition E36 323i convertible with a full bmw service history and only 89000 miles on the clock for the...
  10. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    So basically live INPA details showing desired and actual values show that Charge Air pressure is low even at Idle. The desired value is about 1000 and the actual is more like 800 and it is idling like that. I understand that MAP sensor is responsible for measuring this in Inlet manifold and...
  11. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi, Having owned a few BMWs, this is my 8th but first diesel. I have a 2002 E46 330d mSport Touring Auto with 107k miles on it. Today I noticed that the idle has become lumpy and there's an unevenness when pulling away. Fuel consumptionhas recently dropped off too, from 32mpg to 25mpg. I'm...
  12. General BMW Discussions
    Hi all, currently on the lookout for a 325Ti M-sport (see my wanted thread for more info) and one thing I have noticed is that the asking prices are all over the place. What would I be looking at paying for a great condition, but not perfect car? The few that I have been to view are asking...
  13. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Have been looking at these with my c110 scanner and cylinder 5 shows anything between -2000 and 2500. The set point for each cylinder is between -200 and 200. All other cylinders are between this. The reason I'm posting here is that I've experienced Miss fires/engine hesitation for ages as...
  14. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hello friends, The car is a 2008 E90 318i with the N43 with 72.000 km on the clock. A few weeks a ago started to refuse to rev up and the power loss is severe. It starts well from cold and the idle is perfectly round. I haven't driven it as I am afraid of further damage. A strange metallic...
  15. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi All, I was just wondering how these injector values look? These values are at idle but they seem way off each other, I was expecting then to be similar.
  16. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi everyone, For a while I've been trying to work out why my 2007 330d is regenerating more often than it should. I'm trying to work out whether the engine is producing more soot or whether the ECU is miscalculating the soot loading. Can anyone tell me what back pressure values I should expect...
  17. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi I'd be grateful for your opinion. I use Ista Rheingold for diagnostics. The MAF sensor values on idle are 8.0 - 8.5kg/h. I suspect its too low but I'm not sure of it as i dont know what are the correct values. I try to find out what are the causes of fast sulphurization of the NOX. I want to...
  18. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi, What supposed to be correct signal voltage of MAF sensor in general and in this particular car for different RPMs (idle at 700rpm, 1000, 2000, etc)? I had serious problems with misfiring car, too rich mixture, lack of power. At the end I checked what MAF was giving me. It was 1.35V when...
  19. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi All, I have recently changed the cat converter in my 318ci 2004. However the EML light went on again on the dashboard :sarcastic although the emission tests are fine now (earlier on the car was failing CO levels big time). I know the garage did nothing to the adaptations so I used INPA to...
  20. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi Guys, I did some tests during drive with ISTA-D. ver. 1 https://www.youtube.com/watch?v=XAdWwI5KRUw ver. 2 https://www.youtube.com/watch?v=ZDV5cH2X3Aw I saw that I have too big values from air mass meter. Specialy on the low rpm. I don't want to buy the new one without any feedbacks from...
Top