Search Results for ‘v57’

Hi Hopefully someone can help. I purchased INPA DIS V57 kit from ebay years ago, from David Wragg Holdings - This came with USB connector and software. It sat in the cupboard for years until I 've needed it at the weekend. I have installed this as per the instructions but cannot get...

Hi.. Has anyone got DIS 57 working on an E31? I have a working DIS57, INPA and interface setup. On my 1997 E31 840ci, 20 pin connector, INPA works fine. DIS 57 does not -- any test you like just says "please wait"... forever! Tested via the 16 pin connector on an E46 325i, both INPA and DIS...

Hiya. does anyone know how i go about fixing these faults.most say (fault not present) so why does it come up every time I do a quick delete and rescan? Do I have to remove the manifold to do this? taking into account I am not good with electrics. But i do now have an multimeter :)...

Hello again. I get this come up a lot of the time when I am trying to do a reading on my car. anyone know what is causing this? Thanks for any replies :)

help please ive benn playing with dis for a while now but cant workout how to a. reset the transfer case after the oil change b. find the egr so I can reduce its usage, I read on another forum to change the settings to reduce by upto 40% its operation can anyone help please

Does anyone know how to view the engine temp & dpf pressure?

Hey all, I've got a 2006 Z4 2.0i SE (N46 engine) and quite a while ago I was having some issues with the valvetronic which a local BMW indy couldn't figure out. One of the problems it was causing was a rough idle, so the indy set the idle RPM up to 950, which I guess helped abit? Not much...

Hi Guys, Been having problems with the X3 for some time.... its a 2007 150bhp model. As with many others I had a 'stutter / hesitation' at low speeds on light throttle as well as while maintaining constant speed at higher speeds. This was coupled with sluggish performance and excess black...

Hi. Does anyone knows why i cant activate DPF regeneration with DIS V57 on my e60 2006 2.0 d auto. Showing that in DDE regeneration is requested. Regeneration is enabled. But not active? I drove on motorway for 160 km distance on high revs and etc. Temp before dpf was around 410-420 c exhaust...

Hi I'm woundering if anyone can help. My e91 320d is misfiring and sluggish. It sometimes picks up but then starts misfiring again . I've done an injector test on dis v57 ( see photo) they are all in the tolerances but 2 seem to be different. Does anyone have any experience in this ? I'd really...

Hello everybody. :D It's been a long time...:silly I need french data for dis v57 but the links I find at google (.iso folders for example) are not good... :rofl So if someone have the french data of an update for my dis v57, that should be great! :thumbsup I wait some help... Thanks in...

Hello! Firstly, I'm sorry if I make faults because I'm from Belgium and I speak French but I learned English at school. So I will try to do my best for writting properly. I have nothing planned for New Year's Eve so I can write this tutorial today... In my case, I work with Windows Vista 32...

;) Hi! It's me... Again... I hope you are fine! Your help is so precious... So when I want connect Dis to the car I have this error 200.159. VMware works good, diaghead is "connected", IFHSrv32 run, Dis starts. Diagnostic head in Administration is connected. In the file ediabas.ini I have the...

Hello friends! I seen to amazon that the usb cable I bought is compatible dis/sss.:thumbsup So, could you tell me if I can use dis v57/sss32 directly with a usb cable without serial adaptater because I don't know?:confused Thanks in advance for your answer!

Just had my first go with the laptop, and the car still starts, which is always a bonus! :D I've got the amber DSC and brake warning light, and it gave me the above fault code. I went further into the test schedule and it gave me the actual readings for both sensors. Without any pressure on...

Hi Guys First post so be gentle. I have loaded Dis v57 onto my laptop, Windows7. However when I attempt to configure the diagnostic head under the admin tab, the free diagnostic head appears in the left window but when selected only the IP address appears on the right. The subnet mask address...

I need to recalibrate my steering angle sensor after changing my sloppy steering column U joints. It's giving me "5E40 - steering angle sensor not plausible" error. I've been to check my tracking and it's not even half a degree out. The car tracks fine on the road but INPA says the steering...

Hi all, has anyone used DIS v57 on a post August 2009 build E92, specifically a 2010 E92 LCI? Want to know was it able to read majority of modules or none at all to the point its not worth getting a DCAN cable (BMTechnic) Many thanks

Hi everybody, not sure if this is correct forum but, I have just got the DIS V57 diagnostic software and was wondering if there was any sort of instruction manual around? For instance, some modules are highlighted in black some are not? Why do some modules have an "!" and others an "x" Any...