BMW Forums : BimmerForums banner

torx

  1. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi all I have a 1991 E36 320i and need to take the head off as there is no compression on one cylinder. I would appreciate it if you could advise the Torx socket size needed to remove the cylinder head bolts Many thanks in advance
  2. Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Hi Guys, This is my first post and would like to know if anyone has successfully removed their radio unit with their torx screw broken off. I'm trying to find out a simple method of removal, so i can replace this unit with an android one. Many thanks in advance!!
  3. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Can anyone help please? On this forum and elsewhere I've read T55 and T60 for my N47 engine. I don't want to buy the wrong one. Thanks
  4. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Got a bulb out in my E90's nearside headlamp. They're Valeo ones,I've found the bulbholder in question which is held by two small torx headed screws. Just wondering if anyone knows what size torx bit is needed? As I say,it's nearside so it needs to be a short length bit(allen key stylee...
  5. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi First post and first BMW, 2003 E46 320d es. I've seen conflicting info re what Torx size is required, I've seen T20 and T25 written, can anyone offer a definitive answer please, I'll need to buy tomorrow when I get some contact cleaner. TIA
  6. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi, Anyone know Hex & Torx sizes for the engine covers ? Thanks
  7. BMW 3 Series Forum - Technical Talk on the BMW E46
    To change the rear bearings, I know I need to remove the Driveshafts. Can someone confirm if I need an External Torx E12 or E14. A video guide said E14 but yet written guides seem to suggest the E12 is correct - but is a very tight fit. I've a 2004 318Ci
  8. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi does anyone know the size i need to buy to get the bumper off managed to do it last time with normal socket but not having it now?? Thanks Dave
  9. Hereford BMW - Bimmerforums Shop
    Hi Please can you give me a price for following i need 21 of these torx bolts 24117552108
  10. General BMW Discussions
    Mine have all either rusted or rounded and need drilling out, or some form of serious removal and I need to know the size to pick up new ones. Thanks.
  11. Hereford BMW - Bimmerforums Shop
    Hi can you quote me on 6 of these please 33207572716 Also do you know what size socket they take? it's either an E12 or an E14 im sure Dan
  12. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    I am about to embark on this job and have a decent socket set, magnet thingy etc but I don't have any torx drivers so just wondering what sizes I will need as I don't want to start the job then come across a nut that I don't have the correct tools for.
  13. BMW 3 Series Forum - Technical Talk on the BMW E21
    Anyone know what size of female torx socket i need to remove the cylinder head bolts?
  14. BMW 3 Series Forum - Technical Talk on the BMW E21
    hi guys im fairly new here and to bmw. I have just got myself a lsd for my 328i i want to get replacement bolts for the drivshafts and to prop shaf, does anybody know the sizes of these so i can go out and by them before i try take them out. stu
Top