Hi, I'm just replacing cylinder head after gasket issue and need head torque settings. Can anyone help please?

Hi guys, I am just in the midst of a 2JZ build in my E36. I am planning to use the Getrag 420G gearbox from the E36 M3 Evo. It will be a high horsepower build of around 800 bhp. I noticed that the E36 evo gearbox has a 29mm diameter input shaft in comparison to the E46 M3 (420G) gearbox's 35mm...

Hi All and thanks in advance for viewing this post. I have a leaking rear diff and I need to resealable the back cover. Does anyone know the torque settings for the bolts?

Hello guys, I will be replacing the mechanical tensioner pulley, deflection pulley (aka idler pulley?) and the v-belt in my car. My question is about torque values. I have found that the tensioner pulley is 40Nm, but I cannot find the correct torque for the deflection pulley. I have looked...

Hi all Just about to reinstall my intake manifold on a 2008 x5 3 litre diesel and wondered what the torque settings were for the bolts and the nuts Any help appreciated Cheers Adrian

Hello all would very much appreciate if anyone can tell me the correct torque for the spark plugs and which are the best plugs to go for. ? Have got conflicting advise of 23 and 30 Nm Thanks

Hi all I am going to get the oil changed in 640D Gran Coup 2013 to fix jerky downshift while in cold temperatures, and dealer said while doing the oil change they cant drain what is there in the torque converter, is that true as I have zero knowledge about this? Thanks Sal Sent from my...

Hi All I have an issue now and again my 2003 3.0d x5 gets a wobble its done it twice now the last time it did it i could feel it like it was wobbling back and forth while driving at 40 mph. After just passing mot and most of the time driving without a wobble i thought it must be the torque...

Hi All I have an issue now and again my 2003 3.0d x5 gets a wobble its done it twice now the last time it did it i could feel it like it was wobbling back and forth while driving at 40 mph. After just passing mot and most of the time driving without a wobble i thought it must be the torque...

I'm about to put my cylinder head back on, but have a bad feeling about just one of the 14 head bolts. Before I removed the head, I removed all of the bolts, cleaned and lubricated the bolts and holes, then torqued them back up to spec. Bolt 6 did not feel as tight as the others when I turned it...

Driving to work this morning the transmission warning light came on (Exclamation mark inside a cog). The car was juddering so I took it round to my BMW mechanic. They hooked it up to the diagnostics machine, error came up under Transmission: 92 CAN torque interface The mechanic cleared all of...

Driving to work this morning the transmission warning light came on (Exclamation mark inside a cog). The car was juddering so I took it round to my BMW mechanic. They hooked it up to the diagnostics machine, error came up under Transmission: 92 CAN torque interface The mechanic cleared all...

Long one here.. A while back the flexible part of the pipe to the EGR failed.. directing hot exhaust gasses onto the wiring loom nearby and melting it! I separated out the wires (burning off the rest of the plastic insulation) and spliced in new sections. I am 99% confident that all of these...

Hello, I'v got e90 320d automatic gearbox saloon from 2006. The problem is that it has very low torque. Bmw specification say that car should get 163 bhp and 340nm. I'v got Inpa and when using live readings from gearbox I don't get more than 280-285 nm of torque. I'v got turbo replaced last year...

Hi I currently have a F10 520D Sport Automatic which has done 180k. I'm thinking of upgrading to a G30 530d xdrive which I notice now has Dual Clutch Transmission instead of the Torque Converter. Can I expect any reliability problems or need to replace clutch plates and fly wheels as the...

I have a '99 328i Touring auto, only 54k on the clock, belonged to a little old lady etc. The car has had loads of service, an oil change every year (every couple of thousand miles) and the oil is fresh and clean. The car is pre OBD so just has the big round diagnostic terminal under the...

Hi guys anyone know the torque specs for flywheel and pressure plate bolts on a 2006 318D E90?

Hi there I am new to the forum and I hope some of you might be able to offer me some wisdom 18 months AGO I bought a 57 plate 330i m-sport coupe - manual (N52 engine) after years of Saabs and I absolutely love the car but it has developed an infuriating issue over the last 4 months. The car has...

Looking for a used torque converter for early E60/61 with M54B25 engine. Must be code V81 on the converter. No urgency at the moment. Mine is showing early signs of clutch failure so would like to have another to send away for refurb. Condition not important providing it’s serviceable...