BMW Forums : BimmerForums banner

throwing

  1. BMW 3 Series Forum - Technical Talk on the BMW E46
    Installed new intake camshaft sensor to no avail. Checked voltage and resistance to supply, target and ground wires- all within spec 12 volts supply wire; 5 volts target wire and goes to zero when cam is turned and resistance on grnd wire. Cleaned ecm contacts and connectors with electric spray...
  2. BMW 3 Series Forum - Technical Talk on the BMW E46
    I'm getting only a p0340 code and I've read it could be set off by a bad crankshaft sensor. Shouldn't I also get a p0335 code if that was the case. I bought a new camshaft positioning sensor from advance auto but still get the p0340; wiring looks good and clean. Any advice would be appreciated...
  3. General BMW Discussions
    I'm getting only a p0340 code and I've read it could be set off by a bad crankshaft sensor. Shouldn't I also get a p0335 code if that was the case. I bought a new camshaft positioning sensor from advance auto but still get the p0340; wiring looks good and clean. Any advice would be appreciated...
  4. BMW 8 Series Forum - Technical Talk on the BMW E31
    I have a brand new, boxed, OEM front Throwing Star rim (excluding centreplate) available if anyone needs to replace a wheel. Please PM me if interested, Wasn't sure if selling was allowed here but seeing the exhaust sale on here, I though I would add my contribution. Apologies to moderators...
  5. Tyres and Alloy Wheels Forum
    New to here, what is the availability of Throwing star Alloy Wheels. I have an E34 535i and a 1999 840 4.4 Sport
  6. General BMW Discussions
    Hi, I purchased some error free led fog light bulbs from Hids4u that are throwing up errors! Any tips on how to clear them please?
  7. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi All , have a very strange issue , while driving home in the rain the engine temp gauge shot to hot , i pulled over and shut the car off and checked , t wasn't hot , tried to re start the car and no go , left it overnight and next morning started drove a few miles shut it off and it wouldn't...
  8. BMW 8 Series Forum - Technical Talk on the BMW E31
    There seems to be lots of debate on this. I'm just about to get a set of these refurbed and want the results to be as near as possible to what BMW intended. I've just stripped the stars off the wheels. (quite a job that was as you have to be very careful not to strip the screw heads which...
  9. BMW 8 Series Forum - Technical Talk on the BMW E31
    Hi guys, so finally got my car back from the garage (new bilstein shocks, eibach springs, suspension linkages and joints/bushes all round, brakes line, fuel lines etc :thumbsup ) thought id show an update on some plastic replica throwing star fronts i purchased on ebay, after shafting my...
  10. BMW 3 Series Forum - Technical Talk on the BMW E46
    Yet again car has went into limp mode (code in pic) is that the pedal sensor or throttle problem, if throttle can I try another throttle body to check or does it need setting up/coding?
  11. BMW 8 Series Forum - Technical Talk on the BMW E31
    hi, want to buy 2 front covers for the M SYSTEM II (STYL.21) i need one left hand side and one right hand side. not many of them around atmo, thought id try my look on here :) Cheers
  12. BMW 8 Series Forum - Technical Talk on the BMW E31
    I've gone back to throwing stars, but not in 17" kind. These have been re-made as 19" 3 piece split rims......
  13. BMW 8 Series Forum - Technical Talk on the BMW E31
    Not sure if this allowed so please delete if not. Just wanted to let us 8 owners know that my e31 spec throwing stars are in the for sale section. Cheers
  14. Alloy wheels and tyres for sale
    Selling these genuine Ronal 17" staggered throwing star alloys from my e31. 72.6 mm centre bore 5 x 120. Staggered so wider rears Fit other bmw models also. Good condition for age but would suggest a refurb as kerbed. Come with budget tyres that passed an mot yesterday with advisory that the...
  15. Tyres and Alloy Wheels Forum
    WANTED ,,, 17 inch throwing star wheels , for a 840ci, urgently , just had my 18inch wheels renovated " rondel " style I am told , about five hours ago, with tyres , 10j and 8.5j, although one is not up to par ware wise , I would like to put one of these wheels in each corner of my room , they...
  16. Alloy wheels and tyres for sale
    £475ono located in kesgrave suffolk. 5x 17x8 et20 i lost a cover for one of the wheels so ended up buying another whole wheel. i havent yet painted the cover the same colour. the rest of the wheels were refurbed last year and are still in great condition. i would consider some other wheels in...
  17. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi, I new to this site and would really appreciate some help. I have a 2007 335i with 70k on the clock. About a month ago the car threw the codes 30fe and 29f2 with the reduced power warning. I took it down to my local Indy and they obviously did the diagnostics. However on start up and taking...
  18. Introductions
    Hey there all, I was quite glad to see there is a site such as this one that can gather information and ideas about what to do and how to play with BMW's. I have just today purchased a used 1987 318i which is the car I learned to drive on as a young man. I must have been feeling rather...
  19. BMW 8 Series Forum - Technical Talk on the BMW E31
    Sorry folks I know this is a simple one or you. Can anyone tell me what tyre pressures I should be running on my 840ci (4.0) with 17" staggered throwing star alloys? Much appreciated
  20. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi guys... I've had no problems with my parking light angel eyes (pre-LCI halogen headlight units) for the past year, having replaced the standard bulbs with error-free SMD LEDs. But last week an error popped up in iDrive: "parking light front left failure", and yesterday I started getting the...
Top