BMW Forums : BimmerForums banner

throttle body

  1. BMW Guides and How To's
    All. I’m new here but hoping for some help, having issues with throttle body on my e90 so I am looking at replacing it my self. I know how to do this but I need to know does it require adaption via a Garage once changed. Or plug and play
  2. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi Guys, Really in need of some advice. I changed my Throttle body unit of my E39 525 after getting permanent jam errors. A clean did not fix the problem. After putting in the new throttle body and performing the adaptations using INPA and DIS either the throttle fails to respond when pressed...
  3. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    2004 E60 - 535D & 520D Throttlebody compatibility Looking for a replacement Throttle valve for my 535D and the official part number is 11717804384 having looked on fleabay for a 2nd hand one i've seen ones which look identical for the 520d listed but have a different part number (and more...
  4. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi, I've just had to remove the fuel / air system on my 316i in order to replace a broken plastic connector on the cooling system. On re-assembling the fuel and air system I now find that the throttle valve does not rotate, it seems stuck in the closed position! I haven't done anything with the...
  5. BMW 3 Series Forum - Technical Talk on the BMW E46
    My EML light comes on occassionally and the car goes into limp mode, sometimes it will go off after a few seconds other times it will remain on for the rest of the journey. Tourning the ignition on and off occassionally helps but not always. In the past i've had the spark plugs changed, the air...
  6. BMW 3 Series Forum - Technical Talk on the BMW E46
    Sorry to be so dumb, [I know the throttle pedal is the right hand one,] what I dont know is where the throttle body is on the engine. I 've found the air filter,MAF,turbo etc but looking at the various drawings I cant find the throttle.!!!!
  7. BMW Tuning Forum
    hey guys, i bought a L reg 320i a couple of weeks back and i'm looking to increase the power a bit, i read you can use the 325 inlet manifold for better air flow, i was wondering if u could fit a throttle body from a 325 aswell? assuming thats the best one, what about the head? on my m8s rover...