BMW Forums : BimmerForums banner

thickness

  1. 320d new clutch disk thickness?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hey, Need to know this quickly - how many mm is the distance to the rivets on a new clutch disk (on the pressed side of the rivet)? Maybe someone can do a quick measurement and maybe some photos? Thanks!
  2. E46 330d auto 2001. Front disc minium thickness

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi guys Fitted new front pads a few weeks aga , all was good Started recently to notice steering wheel wobble when braking at speed mainly Just took wheels off and mic d up the disc s they measured front left 22.6 front right 22.4 what's the min limit before replacement Any ideas if this is...
  3. 1996 E39 523i - A question about brake rotor thickness

    BMW 5 Series Forum - Technical Talk on the BMW E12
    I'm having a hard time finding the answer to this one.... Haynes manual says the minimum thickness of my rear rotors is 8.1mm. Is that either: (1) The minimum thickness at which I should install a new set of pads, and expect the rotor to last the life of those pads? (2) The minimum thickness...
  4. 1999 E46 328Ci chassis thickness

    General BMW Discussions
    Hi does anybody know how thick the chassis is were the gearbox mount is on a E46 328Ci?? one of the studs has snapped off which secures the mount to the chassis and i was wondering if it would be thick enough to drill and tap then fasten it up with a bolt? Thanks :)
  5. head gasket thickness -> more compression more power?

    BMW Tuning Forum
    hi there, i remember a while ago hearing about different head gasket thicknesses will increase compression thus increasing performance, is this a bodge job or does it actually work in the real world? many thanks
  6. 2006 E60 525D MSport - Front Discs thickness?

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    I have had some new discs delivered but they are too thick at 30mm vented. I have checked my TIS programme and the online link but that only tells you the minimum safe thickness. I know the diameter is 324mm up front and 320mm on the rear. Any ideas on correct thickness? :confused
  7. 2006 E60 M5 - brake and disk pad thickness

    BMW Chassis and Brakes
    I just brought a M5 (e60). I found it hard to believe when I was told it never had any brakes work i.e original pad and disks as the car has traveled 65000 km. Previous owner was a sedate hot runner long distance driver. My front pads are at 12mm (both sides) rear 10mm Disks are front 32 and...
Top