BMW Forums : BimmerForums banner

stop

  1. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all I had bought my car in 2014 I think with 56k on the clock . It's done 156k miles and has been serviced every 10k miles there abouts Had an issue with turbo when I bought it 4 years ago which was sorted under warranty, I did notice mass fly wheel slight noise after driving around for a...
  2. Technical Guides for the BMW E31.
    For years the common advice regarding testing of the viscous-coupled fan is to poke it with a newspaper - well, stop it! Here's how to test it, how to replace it and how it works:
  3. Technical Guides for BMW E24, E63, E64, F12, F13.
    I'm always surprised when members go off immediately to a mechanic when the car starts smoking on idle and when accelerating - from my own experience 50% - 60% of smoking cases are actually the Pressure Control Valves rather than the Valve Stem Seals. If you have smoking problems, do this first!
  4. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all so I check my codes after I get the start stop error appear . I get the code brake vacuum sensor , signal 2FD3. Seems this is quite common . Is it a diy repair or shop job ? How do I go about it ? Cheers
  5. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi all, With the start stop switched on, my 2012 F10 occasionally goes into park at traffic lights and catches me out when I accelerate to drive off. It sometimes also happens even when the engine doesn't switch off. If I've moved the stick to the left so I'm in DS, the car stays in gear and...
  6. BMW X Series - Tech Talk For All Gen Of X Series
    Hi, I get judders sometimes when going uphill under certain RPM's. It's like the car wants more gas. Also when coming to a stop it jerks forward like someone has hit from behind. Note this seems to happen more frequent the warmer the car gets. Finally the rev counter seems to be sporadic and...
  7. BMW 3 Series Forum - Technical Talk on the BMW E46
    2006 BMW 320cd m sport. No whistling on acceleration but when I take my foot off the accelerator I hear a low pitched whistle.. wooo.. type sound. Happens in neautral too if I rev the engine and take my foot off the accelerator. Any idea?
  8. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi so I eventually got my misses to sale her 1 series msport and get something bigger and get a 320d gt she's had it about 4 weeks when we drive it and the start stop kicks in at the lights it's sound like it sruggls to start but it I turn it off it starts and sounds fine?
  9. Auto Electrical Forum
    Hoping someone can help 2012 x3 2ltr auto diesel with start stop has developed a strange problem. It had the gear selector replaced a few months ago as it developed a fault, it was replaced with genuine bmw part However since then we have a problem when the start/stop is enabled 1. Car stops...
  10. General BMW Discussions
    So only just got this car yesterday, 2009 bmw convertible 1 series with start stop tech Been messing around with it today as hasn’t been working right, so stalling it on purpose it says it’s off although the button on dash indicates it’s on, when I tested it before I bought it it was working...
  11. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Hey first time posting so hello all! Bought my 116d late feb and love it! Just had the service light come on red and when you go into it it's the brake fluid level so I went to my local garage and he said the levels were fine but did stop it up with very little to take it to the top. The light...
  12. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    In a 530d msport? I heard its something to do with the soft stop function?
  13. BMW 7 Series - Tech Talk For All Gen Of 7 Series
    Hi All, After driving a few miles the temperature gauge goes to red, the speed stops displaying speed, the mpg gauge stops working and so does the rev counter. The car also feels as if it is in limp mode and the 'D' (it's an auto) light goes out. I've noticed that the mileage stops clocking...
  14. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    My 320d start stop function is no longer working even in normal temperatures such at 15c. There is no error message on the dash but I have yet to read out the OBD2 error codes from the ECU. Any suggestions would be appreciated. Sent from my GT-N7100 using Tapatalk 2
  15. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi Guys. Last year after fixing vacuum pump (wasn't driven for two days) my battery died (black spot on the battery). I started using cables and then took her for a long run. I didn't check the battery cos there wasn't any problem later. Last week I changed (DIY) Radiator (leak), coolant...
  16. BMW Chassis and Brakes
    I have 235 35 19 on the front and the backs r 245 40 19 and are catching loads any ideas how I can stop this without changing the wheels thanks
  17. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    My car has just gone in to a garage after being stood still for 6 months and is giving the fault code - 5d8d return pump stop. Must be to do with ABS as those warning lights are also and ABS or TC are not working. Garage is unable to identify what the problem is from this fault code and has...
  18. General BMW Discussions
    So im driving merrily down the road about a week ago with the wipers working away on intermitent when they suddenly stop half way :yikes I turned them off and back on but they would only work on full speed and even then i had to time the turning off just right to get them stopped at the bottom...
  19. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    I bought an e90 last week, anly this week the missus was out in it and rang me telling me the abs, dsc and stop light had appeared on the dash while driving. the stop light was flashing red. when she had turned the car off and started it later it was gone but a stop clock appeared with the time...
  20. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    hi guys ive recently done a lot of reading into the dreaded halo strobing matter. what i need to do is disable the cold test on the lcm. i have the inpa ediabas sss dis but cannot find the option anywhere on these. few questions are - can it be done with these or should i buy the bmw scanner...
Top