BMW Forums : BimmerForums banner

retaining

  1. F10 Idea's for Replacement Seized Brake Disc Retaining Screw? (After Drilling).

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi Guys A little advice needed if you please. I swapped out my 520d F10 FRONT brake pads and discs (to ATE discs & EBC Yellowstuff pads) and all went pretty well. Back breaking stuff! :eek Only issue was the offside disc retaining screw just did not want to come out! We fought for over an hour...
  2. E90 h7 bulb retaining clip

    Items WANTED - Post any wanted adverts in here
    Hi guys I managed to drop the main headlight h7 bulb retaining clip down in the bumper area and can't see it or have any easy way of retrieving it so now I'm stuck with a loose light bulb. I don't think bmw sell these clips separately and eBay don't seem to have the correct type. If anyone...
  3. E61 CIC upgrade but retaining CCC Factory TV Module

    Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Hey guys, this is my first post and did try searching before starting this new thread, just brought a 2008 535d m sport touring and almost happy with the car except for the in car nav - coming from an a4 b6 advant which had the RSN-E - I miss having my music on SD cards and having to use the...
  4. Bmw retaining spring clips?

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    I need a replacement as I lost the spring clip when changing my thermostat on my 2005 530d Cannot get them individually from bmw and I refuse to pay £45 for the bottom coolant Hose just to get the clip. Any ideas or anyone have one spare? Thanks
  5. 2003 E65 730d - Parking sensor retaining clips?

    BMW 7 Series - Tech Talk For All Gen Of 7 Series
    Hi, I have a 2003 BMW E65 730d in metallic black. I'm trying my best to source 8no. parking sensor retaining clips, I've pretty much exhausted my options and I'm wondering if anyone else on here has any suggestions as to where I can get hold of them, or if anyone here has any that are for sale...
  6. Stripped brake disc / rotor retaining screw

    BMW Guides and How To's
    I started doing my rear brakes / discs and after I had them done I thought... No problem front ones next! After five minutes I had the calipers off and thought "this is easier than the back" and that's when I screwed up. I started to attempt undoing the retaining screw and thought "um that's a...
  7. E30 325i 1987 RHD how are retaining clips holding screen wash tube and cable removed?

    BMW 3 Series Forum - Technical Talk on the BMW E21
    Silly question, how are the circular plastic clips that hold the screen wash tube to the car close to the headlamp and on the bonnet removed? It seems easy enough to remove the bonnet, but two plastic retaining clips holding the washer tube are being difficult. It would be better to save and...
  8. E92 Retaining steering controls and reverse sensors

    Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Hi, I am new to the world of BMW and so just wanted some clarification on a few issues associated with the stere on my E92 335D The OEM system is the Professional system and so non i-Drive. I have replaced this with an Alpine CDE-113BT that I already had from a previous vehicle. Once fitted...
  9. Brake disc retaining screw

    General BMW Discussions
    The muppet who fitted my new front discs and didn't clean the hubs first (which is why I'm doing it again) also drilled the head off the disc retaining bolt on one side, presumably because it was seized. (a) Is it worth getting this sorted? The wheel, of course, is what really holds the disc...
  10. retaining factory features with aftermarket HU

    Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Just bought a 330d and want to replace the business cd player with my alpine unit as it has USB support but I don’t want to lose the factory phone/Bluetooth/steering control support. Is there anyway I can retain these features with an after market headunit? thanks
  11. 1997 Z3 e36 Rear hub retaining nut(SOLVED)

    BMW Z Series - Tech Talk Z1, Z3, Z4, Z8, Z9
    Hi all, First post, 1997 Z3 1.9 manual. Anybody help. Im trying to change the disk backplate on the rear of my Z as the handbrake shoe retaining pin has broken free but cannot undo the hub retaining nut, Is it a normal thread and loosens anticlockwise? Thanks
Top