BMW Forums : BimmerForums banner

removalfixed

  1. BMW 3 Series Forum - Technical Talk on the BMW E21
    Ok as above i need to remove my pilot bearing the one that the gear box spline sits in, in the crank. Last time i changed my clutch the bearing just droped out, so i knocked it back in. So this time i decided to change it but once i removed gear box a couple of ball bearings fell on the...
  2. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hello, as above really, have been trying to fit a new gearknob and i cant get the old one off. I have pulled,twisted left and right but it wont move!, can anyone help please. Cheers Christian.
  3. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi all Can anybody body advise me on the best way too remove cylinder head, on 316i E36 engine and do i require any specialized tools.Head is going for skim and compression test.Im also looking too purchase a new rad,any suggestions on where to find rads at bargin prices.
  4. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hey all, Right, I bought and have been working on getting a crash damaged car back on the road. On close expection it looks like I will need to change the steering column, have a donor car so not worried about parts. Planning to go at this tomorrow so thought I would check to see if anyone here...
  5. BMW 3 Series Forum - Technical Talk on the BMW E46
    How easy is it really to remove this valve, im no expert on cars but would really like to inspect my egr valve and make sure its clean, the cars done 72k now so im getting worried. could someone please help me out with a link of how to remove the EGR valve on this car. I am looking to do this...
  6. BMW 3 Series Forum - Technical Talk on the BMW E21
    will the battery need to be connected to remove the windows or can they be removed with no power. i ask because i will need to cut the wires to the fogs and am not sure if this will short out the system once the battery is connected. cheers Morgan
  7. BMW 5 Series Forum - Technical Talk on the BMW E12
    Very simple question. How do I remove the ignition switch? I have removed the steering wheel, shrouds, indicator and wiper switches but cannot work out how to remove the ignition switch. The Haynes manual simply says to remove it but it won't pull out, there are no bolts to undo and no apertures...
Top