BMW Forums : BimmerForums banner


  1. Auto Electrical Forum
    Working perfectly then next day flat battery. Charged battery but no start. Cranks and starts with easy start. Had injector pulse test and no pulse. Told it was the ecu. Tried to get ecu repaired. Couldn’t do it. Had second hand full ecu, cas, and key fitted and coded to rest of car. Exactly the...
  2. General BMW Discussions
    Hi everyone! Im looking at fitting front parking sensors to my newly acquired BMW 118d. The system ive purchased uses the speed pulse wire to activate the front sensors below a programmable speed. Does anyone know the colour of the wire and the easiest location to get it?
  3. BFuk Open Topic
  4. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi - hope someone can help. I have this really annoying pulsing noise inside my Touring when moving, particularly noticeable in the lower gears. The best way I can describe it is that it's similar to the effect you get when a back window is ajar and you get a pressure pulse inside the cabin. I...
  5. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Hi bought this car as a non runner. Found high pressure pump not working so changed.main tank pump primes on ignition and engine cranks over but no pulse to injectors ,any ideas would be appreciated
  6. General BMW Discussions
    Anyone know where Pulse generator is located on a e24-80? Skickat från min iPhone med Tapatalk
  7. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi can anyone help with this issue, My car 1999 E46 323ci has been left on the drive since august last year and im now trying to get it back on the road again. Here is the problem.. When I drive it I can hear a knocking sound, this sound is very even in timing and increases as I speed up the...
  8. BMW 3 Series Forum - Technical Talk on the BMW E21
    So after doing a swap to m52 engine, I was left with 2 leads with no home. I Googled the wire ticket number came up with pulse generator. The leads are in the same sleeve and theres a third thats still attached and connect under the inlet mani to the block, similar to the connection on the fuel...
  9. Auto Electrical Forum
    Hello, I am in the process of wiring a push button start to my E36, as the ignition has failed and I currently get around by having it hotwired. The push button start module needs to see a pulse from the central locking and from the hazards at the same time in order to become operable. This is a...
  10. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi everyone have a3 series 2.0 18 d .2010 I need to find a pulse to fit a taxi meter can any one help thank you dendocx
  11. Auto Electrical Forum
    Hi all need to find a pulse so I can fit a taxi meter to 3 series 2.0 18 d estate. can you help. colour wire location or maybe the abs part.
  12. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi, Yesterday I had some of the dash out including the heater/ temperature unit (under head unit) to remove a parrot bluetooth do dah, and removed the relay for the rear boot window (touring) because it was faulty, I put everything back together, but now my heater blows in a pulse rather than...
  13. BMW 3 Series Forum - Technical Talk on the BMW E21
    Can some one please tell me where i would find the speedo pulse sender which emits the pulse for the speedometer please? Thanks Maddy
  14. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi Guys I am wondering if any one can tell me which wire i can pick up speed pulse. I am trying to hook up a command AP150 cruise control to my 97 318i . Thanks Maddy
  15. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi guys,,little bit help,,had me car plugged in for diagnostics today as it been running a lil dodgy,,anyway it came back that the cam shaft sensor thingy has gone,,anyways got a few prices on the part and they aint bloody cheap,,anyways went down me local couple of scap yards and they got a few...
  16. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi, this is my second time posting, I have a 1997 528I, I just put a new starter in and all I get is click, click, click . Thats when I hold the key down in start position. everything is on in dash lights, I charged battery, I pulled the starter and put a different one in, I checked...
  17. Diagnostic Hardware and Software Discussion forum
    Reading through the INPA screenshots and my Pulse duty factor i.s Controller is at ~40 at idle and the Ignition angle also has an exclamation mark next to the result What causes these bad readings? i have tried to find information about them but threads are dead. Pictures are on my old thread...
  18. BMW 3 Series Forum - Technical Talk on the BMW E21
    I'm having some trouble finding the info on compatibility for using ABS pulse generators between the models E36, E39 and E46. So my question is: which one of these abs pulse generators is compatible with which bmw model? Thanks in advance!
  19. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi all,i have an issue with my 2003 318,basically it's turning over but not starting,getting a good spark,getting fuel to rail but no injector pulse,plugs are dry,also tried test light in injector plug,nothing. I was thinking the crank sensor so i changed it as i had a new one lying,no...
  20. BMW Z Series - Tech Talk Z1, Z3, Z4, Z8, Z9
    My son just bought a 99 z3. It ran perfectly on the ride home. We stopped for fuel, and at a restaurant and it started easily each time. Once home we shut it off and tried restarting 5 minutes later and the starter would crank but the engine would not start. Here is what I have tried so...