BMW Forums : BimmerForums banner

perished

  1. Perished Windscreen Trim

    BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Any tips on replacing the trim? Any buying recommendations? Cheapest I've found is £50 on ebay # 131755630750 or 202004014391 or 382851715206 I have been treating all the rubber trim with Gummi Pflege twice a year, so am surprised at the sudden disintegration! I am missing 1 securing cap /...
  2. Perished rubber bush?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    I think the part I'm referring is called a rubber bush (excuse my ignorance on car parts). My vehicle, a 2003 (52) 320d SE Touring has been regularly serviced, runs well, and does not suffer from any leaks, either inside the engine bay or underneath the car. I was just doing a check of fluid...
  3. Perished pulley

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Change front bulb and just having a general look about and found the large pulley on the front of the engine looks perished. It looks like a rubber centre which is cracked anyone come across this before
  4. small vacuum pipe on egr perished

    BMW 3 Series Forum - Technical Talk on the BMW E46
    as above the small pipe going to egr is badly perished any idea were i can get this from as i looked on ebay and dont really know wat its called thanks
  5. 320d E46 2002 - Perished or crumbling vacuum tubing

    BMW 3 Series Forum - Technical Talk on the BMW E46
    I'm currently doing the cursory swirl flap replacement,with a few hiccups along the way(intake manifold rubber mounts going missing - not in the engine I might add). This is my first BM so bear with me if this is an old problem: I noticed the vacuum tubing is that poor quality mesh covered type...
  6. Perished Vac Hose

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Last night as I was driving on the motorway I noticed that EML had come on, the car still drove fine so I completed my journey and plugged in my code reader as soon as I got home. The reader showed 2 codes (Po121 and 124) and I googled the meaning of these codes to find that they were related to...
  7. 2005 E61 Turbo seal perished, worth checking

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Interesting one for those M57N owners out there with post 2004 engines. I was getting a lot of hissing of the turbo/induction/exhaust variety when I booted the car and so started poking around. Noticed a lot of oil on the flange that holds the pipe to the intercooler to top of turbo and found...
  8. 2005 E61 525d - Self levelling suspension pump feed perished

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    I know this is well documented but it won't hurt to remind all early E61 owners to check the air inlet feed to the compressor that runs the self levelling suspension. This was mine Just replaced it with a piece of 5mm clear plastic tube, 15 minute job
  9. e36 rubber seals perished

    BMW 3 Series Forum - Technical Talk on the BMW E21
    help please, my convertible has new roof and is now leaking both sides apparantly the rubber seals are deteriating, bmw say it needs 2 new seal gaskets parts number 51-71-8-219-551 and 51-71-8-219-552 at £360 gulp, is there anything i can put on the rubber bits at the top or is there a cheaper...
  10. 1996 E38 B12 perished rubber seals

    BMW 7 Series - Tech Talk For All Gen Of 7 Series
    Hi Guys, I need some help please. The rubber seals fitted around the trim above the doors has become brittle and needs replacing. It fits on the trim on the rear roof pillar. does anyone have part numbers for this and has anyone replaced these? and at what cost? ( To your wallet and not your...
  11. 1995 E36 320i Connections perished need to know wot this is.

    BMW 3 Series Forum - Technical Talk on the BMW E21
    ok sorry if i seem a bit stupid with this. i have included a picture with the part circled. its from the air box which goes into the throttle body. i think thats wot it is. the 90degree rubber pipe. which has two hoses connected to the bottom of it. and where they attach the rubber has perished...
  12. 2000 318i E46, Pipe Perished, causing Engine Management Light.

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi all, I have a persished pipe in the engine bay. I would just like to know what it is called or what it does, so I can get a replacement. Will probably getting a replacement from the stealers. Here's the pics: Any help would be great! I could not find any part numbers on the pipe before...
  13. 1996 528i E39, perished hoses

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    1996 528i E39, perished hoses (FIXED) My car is poorly at the moment, left for work yesterday and it overheated within 15mins, pulled over to be greeted by masses of steam coming from the engine bay... Closer inspection revealed that where a hose went into the engine block it had blown and was...
Top