BMW Forums : BimmerForums banner

manifolds

  1. M52 exhaust manifolds

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Does anybody know if the M52 exhaust manifolds fit a RHD e46 330i ? Do these manifolds go clear of the steering knuckle ? l m from Norway but have a RHD car, and its hard to find headers for these RHD cars. Very thankful for answers:
  2. Making Shorty Headers

    Making Shorty Headers

    I made my own M52 Shorty Headers using using aftermarket 3.2 EVO headers that i shortened and welded on my own flanges
  3. Making Shorty Headers

    Making Shorty Headers

    I made my own M52 Shorty Headers using using aftermarket 3.2 EVO headers that i shortened and welded on my own flanges
  4. Making Shorty Headers

    Making Shorty Headers

    I made my own M52 Shorty Headers using using aftermarket 3.2 EVO headers that i shortened and welded on my own flanges
  5. e46 330ci exhaust manifolds x reg (2000)

    BMW Tuning Forum
    hi all, im looking at changing the exhaust manifolds on my bmw but i cant find any exact info. is it actually worth changing the stock ones, do you get much if any hp gains, are the stock ones restrictive? my one has the cats underneath the car and not on the manifolds. i have seen a few pics on...
  6. E36 3.0l m3 manifolds on 2.8 z3 ?

    BMW Tuning Forum
    Its well known that m3 3.0l manifold will fit 1998 328i but will that fit 2.8 z3 ? Any one done this mod ? Any info
  7. 1996 E36 M3, advice on insulating exhaust manifolds

    BMW 3 Series Forum - Technical Talk on the BMW E21
    Anyone got any info on wrapping exhaust manifolds with insulating wrap? any pros & cons? Cheers steve :)
  8. M50 manifolds

    General BMW Discussions
    Why they so expensive?? If you can be bothered it's better to buy a car with them on strip it of and sell the rest of the car at a profit .. May just do that lol
  9. 94 E36 318is Turbo Manifolds

    BMW 3 Series Forum - Technical Talk on the BMW E21
    Hiya Guys, This time next year I should be well on the way to getting a Turbo fitted to my car...Buying another block and rebuilding that ready for it first.. However...I'd like some opions on which Manifolds would be the best for minimal back pressure...And also which would work best given the...
  10. E36 E46 E90 and E92 cast iron turbo manifolds - PROPER RHD ITEMS

    Turbocharging your BMW
    Those into turbo conversions know that there are no decent RHD turbo manifolds available and you're most likely going to have to make your own or compromise a LHD manifold. I have finally found a cast iron RHD manifold for my own E36 compact S50B32 project... but E46, E90 and E92 manifolds are...
  11. Replacing M52 exhaust manifolds with S52

    BMW Tuning Forum
    I've posted a couple of times about this and I've done a lot of searching. Most of the posts seem to quote from the same article that makes removing the old manifolds sound very easy. I thought I'd post how I got on and what problems i'm facing for anyone else that wants to try this. My car is...
  12. 1995 E36 M3 - Exhaust manifolds

    BMW 3 Series Forum - Technical Talk on the BMW E21
    hi, i have a non evo e36 m3 1995, my crinkled section on my manifold has split, i do have a e36 m3 evo manifold sat around, can anyone tell me if the manifold will fit straight on to my m3? if so is there any mod that need doing?. thank you
  13. 1996 E36 328 more power, m3 manifolds and exhaust??

    BMW Tuning Forum
    hello all have a e36 328 head gasket went so dropping a new motor in gone be another 2.8 as i cant be dealin with insurance as im only 18!. some one said that you can put a full m3 exhuast including manifolds and you get really good gains, has anyone dont this? looking at doing the 325 inlet...
  14. 1997 E36 325i - stainless manifolds.

    BMW Tuning Forum
    hi guys, I just wanted to know if i put a stainless maifold on a e36 325 and on an e46 325. Will this increase power or would i lose power. Some sites say that a stainless manifold can increase bhp by 15bhp and are dyno proven. Is this true???????:confused Thanks
  15. 1991 E36 325i - SS Exhaust Manifolds

    BMW Tuning Forum
    Hi all, i have noticed for some time now on fleebay stainless steel manifolds to suit my m50 325 lump, they're constructed of 304 stainless (a fairly average grade in architectural terms, not sure about automotive?), but otherwise don't seem bad, mandrel bent tubing, CNC machined flanges etc...
  16. 1998 E36 328 - replacement Inlet Manifolds.

    BMW Tuning Forum
    Now I have done a bit of research and I thought you guys might be able to help. i have heard that the 325 manifold has a much wider air intake than the standard 328 one and that if I replaced my manifold with this, I could increase my BHP by up to 30. Is this true? If so does anyone know where...
  17. E46 M3.2l stainless-steel manifolds

    BMW Tuning Forum
    just been looking on ebay for a e46 m3 body kit for me old man and came across this...
  18. E36 1994 320i tuning throttle body manifolds cams ect??

    BMW Tuning Forum
    hey guys, i bought a L reg 320i a couple of weeks back and i'm looking to increase the power a bit, i read you can use the 325 inlet manifold for better air flow, i was wondering if u could fit a throttle body from a 325 aswell? assuming thats the best one, what about the head? on my m8s rover...
Top