Search Results for ‘m62b44’

Hello, does anyone have both cats available? The oem were replaced by some nasty old tiny ones. Maybe M62TUB44 also fits.

hi, been posting in 5 series about my l322 range rover m62b44 v8 rebuild, told this section might be more suited?¬:hihi. I eventuly got a full version af "RAVE" and it gives very good detail on rebuilding the m62b44 with diagrams. if anyone needs this info?, got it on my hard drive in a zip...

Well im getting ready to re assemble my m62b44 lump, but cant find any info on the outer bolts on the main caps, there is some sort of screw/coller adjustment?,got the torque settings but there must be some sort of setup for the adjusable collers?:confused

Well rebuilding a m62b44 lump for my l322 range rover, now iv found that a set of new bolts for the mains and rods are over £200!:mad. some mecanics iv spoke to say i could reuse the old ones if there tourqed right and use lock tight?,

well had to remove m62b44 lump from my l322! took 4 hrs to pull the front and disconect the top of the engine http://i.imgur.com/rylGPHi.jpg and 2 hrs to remove (good old kev) http://i.imgur.com/PyuLjyn.jpg see my other posts for repercusions of timing chain guide falier:hihi

hi, everyone, well got a m62b44 lump hoping to rebuild, seen a utube vid on changeing the shoes on the exhaust chain tensioners?, any ideas what there called and where to get them? thanks

I hope i have the right section to start this thread!. went and brought a l322 (range rover/bmw!) from a salvage site, oil light on/no oil.:frown, it has a m62b44 lump. turns up on the transporter tryed to start and it made the most horible noises and fired on one cyl!:eek. well stripped the...

Anyone shed some light on this, I personally think timing myself. M62B44 engine done about 5k miles since a rebuild but has sat for many years, it's done about 1000 miles this year and off and on it drops the whole offside bank off, but it would kick back into life, however now it is...

Hi guys, I'm new to the forum I'm looking to fit a m62b44 to my old range rover. I've sourced the engine and id like to get it running on the floor before it goes near the car. Can someone talk me through everything I'm going to need and do to get it going? I've Google the subject loads but...

Hi all, Now this subject is something I have read a fair bit about but am unsure about how to continue. I have heard all the things about the cost of doing the swap and that it is cheaper to supercharge but I want a v8 and to build up from there. So there are videos and build threads on the...

Hi guys, My first post here, I have wanted to ask this for a while but I didn't want to waste anyone's time. I'm a young aircraft Engineer on the south coast of the UK and I've recently inherited a BMW E34 535i, I've always dreamed of putting a V8 in it. I've done a bit of research but there's...

I'm looking for a wiring harness and ecu for my m62b44 engine.

Hi, I already have v8 power in the form of the m60b40 in my E30. If I wanted to change to the m62b44 I'm well aware that it's not going to be a straight engine swap but can anybody say for definite what I would need to do to make the change. Thanks