BMW Forums : BimmerForums banner

m30

  1. e36- 3T (M30) immobiliser issue after flat battery

    Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Hi Guys, My car is driving me mad, i have a 1998 e36 328i and i let the battery run very flat over winter. I have fitted a new battery to the car but i don't seem to be able to 'mobilise the car', all the electrics work on the car (including central locking) appear to work. I have tried...
  2. looking for an M30 730i engine

    BMW 7 Series - Tech Talk For All Gen Of 7 Series
    with the motronic bits... I'm posting here on the very unlikely off chance that someone has one lying around, which would be brilliant, or knows where I could get one... thanks! alex
  3. M30 oil pressure problems

    General BMW Discussions
    Hi, I have a 1984 528i with a big problem. I'm sure the news is bad, but I'll ask anyway. The oil pressure light is VERY slow to go out if the engine is switched off for any length of time. It takes over a minute on first start in the mornings. I have changed the oil using 20w/50. I fitted a...
  4. 1994 e34 525 tds engine swap help/ advise needed changing to 535i m30 b35 engine

    BMW Tuning Forum
    Hello. I could do with a bit of info on this realy my tds diesel pump has finaly given up. So I have got a slightly older 535i sport that I can have what eva I need off to do the swap here is a list of what I think the problems I am going to have are can you think of any more and has anyone...
  5. 1987 E30 316 - m30 clutch question.

    BMW 3 Series Forum - Technical Talk on the BMW E21
    hi i need to install anew cluch in my e30 m10 car my dealer has only m30 clutch and he said that it will fit my m10 car. it is true? thx
  6. 1991 E32 730i - M30 Pressure Regulator pipe

    BMW 7 Series - Tech Talk For All Gen Of 7 Series
    My 730i (3-litre straight 6, automatic) has been running really roughly lately, and I've been trying to solve the problem by checking through the ignition and fuel systems. I found that the vacuum hose from the pressure regulator wasn't connected to anything at the other end, and now I've got...
  7. 1981 E24 635csi - Identifying m30 big valve head ?

    BMW Tuning Forum
    hi folks I wonder if anyone can help ,I run a very nice 635 csi 1981 vintage,and I was going to remove the head ,to carry out an overhaul. until in a recent chat with a fellow owner, I was asked, why not replace it with a head from a later model 535 i sport ? apparently this is a more efficient...
  8. 1991 E34 535 M30 - HT Leads Resistance Check,Are These Good Or Bad?

    Auto Electrical Forum
    E34 535i M30 HT leads have been tested today with a multi meter set at 20k and these are the following readings,the reading which concerned me most was from the the King Coil Lead. King Coil Lead: 1.99 HT Lead: 1=6.03 2=5.58 3=5.90 4=5.56 5=5.95 6=6.06 This car is a non starter and I am not...
  9. Where can I source m30 engine carbs and manifold (non injection)

    BMW Garages and Parts Retailers
    as above, if anyone knows of where i can get a set of carbs and a manifold for the m30 engine that would be awesome. cheers. rob.
  10. 1989 535i E34 M30 Right Hand Drive Headers.

    BMW 5 Series Forum - Technical Talk on the BMW E12
    Hi Guys, new to the forum(down in New Zealand) and would like to know who can supply headers for the E34 535i. Anyone had them made and can you fit them properly with the steering box there, any help would be appreciated.
Top