BMW Forums : BimmerForums banner

inpa

  1. Diagnostic Hardware and Software Discussion forum
    Hi, Could someone help with any advice regarding connection to car(E63 635D 2009) please. I've both a cable for ebay with all instructions and software. Change to DCAN settings but no luck, tried on win 10 64bit and 32bit. Couldn't connect to INPA or ISTA +. Any help would be much...
  2. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    I have installed INPA 5.0.6 from an installer supplied by my data cable supplier who is giving no support. I can clear codes but cannot do anything else. Install did not have N47 engine. I managed to add N47 engine following these instructions Adding N47 engine to INPA!! - babybmw.net Cut...
  3. General BMW Discussions
    Hi, hoping someone with good experience of the INPA package can give some help here. I put it in general discussion as I guess INPA applies to all models. I bought the cable and diagnostic package from BCABLES for my E93 and also an E88. Had lots of confusion so far trying to get it to talk to...
  4. BMW 3 Series Forum - Technical Talk on the BMW E21
    Is it possible to connect to e36 m41d17 with INPA? Am I missing something? Cant find the M41 option in INPA
  5. BMW 3 Series Forum - Technical Talk on the BMW E46
    Welcome everyone. First off, please, but I don't speak English well, so I called on the google translator. I have the E46 320i with the M54B22 engine mentioned in the title. The symptoms are as follows: One minute after the car starts cold, the fault is signaled. Stuttering, stuttering...
  6. Diagnostic Hardware and Software Discussion forum
    Hi guys, I have a problem with DIS program it seems it's just not working properly. INPA works fine without any problem, but when I start DIS program I get a message, data transmission disturbed! What would be the problem? I need DIS because I upgrade LCM to newer SW and with PA I changed VIN...
  7. General BMW Discussions
    Hi guys. I’ve got INPA but cannot get the steering angle sensor calibrated as my install doesn’t have the ‘special tests’ script with the calibration. Does someone have a link to a version with it? Cheers Chris Sent from my iPhone using Tapatalk
  8. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi all, Im having multiple issues with error codes on my 2008 e60 520d m sport lci with 150k miles on the clock. Ive read all the codes using INPA and DIS. The codes are as follows; DDE Diesel Electronics OL 4B1C Fuel Filter Heating, activation 4C5E Particulate filter system minimum...
  9. Auto Electrical Forum
    Having worked mainly on E31s for the past 15 years I still use the original MoDIC on an old BMW/IBM laptop, but I need to troubleshoot newer cars now so am looking for a replacement. I would like to get rid of the cables, so is there anything out there with full DIS/INPA functionality (diags...
  10. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi. I am new here on Bimmerforums, hope that you guys can help me with my little problem I have a '04 e46 320d touring, where the rear tailgate window is showing in the display as open aswell in INPA (see photo) I have traced all the wires and testet them all that none of them has breaks on...
  11. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi there My dad has a e39 2003 520i M54B22 with only 60K, recently it has started experiencing some issues with the gearbox and starting. It has been hot here in London and I have noticed the problem generally occurs in the heat. About a week ago it would not start, no crank nothing at all but...
  12. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi, Any INPA experts around…? I'm trying to use it for the first time and not having much luck. I'm trying to read my DSC/ABS codes as I think I may have a faulty ABS sensor (traction control and handbrake lights have come on). I can connect and read engine info etc but if I try and read the...
  13. BMW 3 Series Forum - Technical Talk on the BMW E21
    whilst driving my car on the motorway(normal speed), the engine light came on (yellow box half full) that looks like the following I got this error once before(for the first time) and never had it again but for sanity I ran a diagnostic using INPA and this was the list of errors I got...
  14. General BMW Discussions
    I've just got hold of INPA, and was wondering if that can program new keys, and what is required for BMW key programming? The current key is one of the diamond shaped ones for an E46. Doesit need a blank key, or can any random key be matched to the car?
  15. Diagnostic Hardware and Software Discussion forum
    I have just changed E61's, my old one was a 2005 2.0d. I could get INPA to connect to that. However my new E61 is a 09 525 with the 3.0D engine and no matter what I do I can't get the laptop to connect. is there a different lead for the later LCI E61's? Thanks in advance
  16. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hi everyone I was looking for some help diagnosing the root cause of my car start/stop feature. The vehicle is a BMW 320d E90 LCI 2011 model Efficient dynamics(remapped a couple of years ago) The start/stop feature has stopped working after I had a recall from BMW a couple of months ago...
  17. BMW ECU Tuning and Standalone Tuning
    Hi I have an E46 320d - 150bhp 2003 facelift model with the following mods: EGR delete Swirl flap delete Straight pipe Hybrid turbo core in standard house (using the exact same settings as the standard core stop screw) Ram air filter Remap... Now, I have the remap before I put the hybrid core...
  18. Diagnostic Hardware and Software Discussion forum
    Help Please I have recently loaded INPA and I am having trouble selecting the N45 engine variant. When I select F2 E87 and select Engine and go to ME9.2 /MEV9.0 for N45 / N46 I get the below error. Group file: D_Motor SYS-0012: IDENTIFICATION ERROR Program will be stopped I can access other...
  19. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi, I'm having an issue with my air con in a 645 (2004). No cold air at all. I've attached an error log which seems to have 3 faults. Also inside the software the voltages seem high, for "powersense" or very very high for KMV (see attached image). I think the KMV is the compressor. I've not...
  20. Auto Electrical Forum
    I have inpa and the lead that I had to solder in order for it to work. I used it on my e46s but when I bought my lci 118 the engine code was not on there. Looks like my version is pre lci, or pre 2007 cars. Can my version some how be updated with the later cars? Or do I need to buy a newer...
Top