BMW Forums : BimmerForums banner

injector

  1. E91 335d limp mode *STRUGGLING NOW*

    Technical Guides for the E90, E91, E92, E93, F30.
    Been chasing down a problem now for a good few months. E91 335d MTEC intercooler, EGR delete, DPF delete, remapped and box flash. However occasionally it throws an EML and goes into limp mode. The two codes that show are P0030 (HO2S heater control sensor circuit bank 1 sensor 1) and P3002 (Fuel...
  2. Injector seal replacement e87

    BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Hi all, one of my injectors decided to spring a leak today. Just wanted to know if it’s a diy job? I’ve done a bit of research but haven’t been able to find videos with my exact engine. Some people are mentioning coding the injectors, is that something I would have to do? Thanks
  3. 2009 N47 Injector Seals

    E87
    Hi I am after some information I recently changed an injector seal (Copper washer) and noticed a rubber 'O' ring type seal near the top of the injector/ cam cover. Is this part of the rocker cover gasket? Or is it simply an 'O' ring... Mine was perished and burned due to the injector leak, is it...
  4. E81 118D Injector Seals/ O Ring

    BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Hi I am after some information I recently changed an injector seal (Copper washer) and noticed a rubber 'O' ring type seal near the top of the injector/ cam cover. The recess is in the head rather than the injector body. Is this part of the rocker cover gasket? Or is it simply an 'O' ring...
  5. Failed Injector Seals - DIY Job?

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    My local garage has diagnosed failed injector seals/leaking combustion gasses on 2 of my injectors after investigating burnt oil type smell in the cockpit. A local diesel specialist has quoted £320 + VAT minimum to remove, check, re-seat and refit injectors with new seals, but they have said the...
  6. injector help e60 m47

    General BMW Discussions
    hi :) just wondering if any of your guys on here can shed any light on this one, as im confused by it m47 engine, ticking when cold, very lumpy idle when warm, alot worse if its trying to do a regen etc, i have some injector figures, thought it was pretty straight forward and replaced number...
  7. 320d problems possible injector?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi guys, ive got an 03 E46 320d 150bhp that has developed a problem,basically as I was driving there was a loss of power but the car still ran,I called up the RAC and the guy reckoned it could be a faulty injector (his diagnostic software was useless and didnt show up anything) but he did say in...
  8. E90 320d injector issues after cleaning inlet manifold.

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all. Hope someone can help. Had abit of a nightmare time recently. I decided to take my inlet manifold of my 320d 2005 e90 to clean it. After putting it back on the damn thing didn't want to start. However, after many attempts cranking it finally jumped into life. But ran rough. So I...
  9. N46 Injector E83 Vs E90/E92

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi people, New to this forum but thanks for all i've learnt here so far reading your threads Hope someone can help me with this: I have an X3 xdrive 2.0i E83 (mfg year 2009) with the N46B20BC engine (this is the exact engine nomenclature as stamped on my engine) When i check parts for it in...
  10. N46 E83 Injector vs E90/E92

    BMW X Series - Tech Talk For All Gen Of X Series
    Hi people, New to this forum but thanks for all i've learnt here so far reading your threads Hope someone can help me with this: I have an X3 xdrive 2.0i E83 (mfg year 2009) with the N46B20BC engine (this is the exact engine nomenclature as stamped on my engine) When i check parts for it in...
  11. E63 (2008 630i LCI N53 engine) injector replacement, coding?

    BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi all, I’ve acquired a nice 630i, though it has a couple of issues. The one I’m least sure about is a faulty injector. No3 injector seems to be leaking when the engine is off. Cold start is rough for a couple of minutes. I’ve trawled through the threads on cold start, decided to take the...
  12. Injector upgrade

    General BMW Discussions
    Happy weekend all, I'm new here. and own a pre face lift 325i auto saloon with bbs body kit on it. just wondering what the psi on the original injector on the 325i ? looking to upgrade the injector to Bosch EV6 with flowing 320cc. is the EV6 injector fine with my car? Thanks all for the...
  13. 2005 E46 330ci Intermittent Misfire

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Very occasionally on cold start, my 160k mint 330ci misfires. Sometimes it will clear on a switch off/switch on. When cleared, it is smooth for as many miles as can drive and never messes around when warm. DISA ok and Vanos ok. V smooth engine - when not misfiring. Changed No4 coil as I thought...
  14. Injector return line

    BMW X Series - Tech Talk For All Gen Of X Series
    The fuel return line on our 2009 E70 3.5SD keeps coming apart on hard acceleration. The connector to No 1 injector had a crack in it so I fitted a complete new line, but part way aling the line is a plastic fitting like a mini fuel filter, and it comes apart there and leaks fuel everywhere. Any...
  15. N54 index 9 injector NEW

    Items WANTED - Post any wanted adverts in here
    Hi all, If there is anybody with a new index 09 injector lieing around in their garage and you want to sell please let me know:)
  16. Inpa injector coding

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi just wondering Is their anybody local to Worcestershire that would be able to code my injectors for me
  17. Injector codes

    Technical Guides for the E90, E91, E92, E93, F30.
    Hi could anybody help. I'm getting these codes come up but can not find nothing about them would it mean I need to replace the injectors many thanks
  18. 2003 e46 320d, injector coding inpa

    BMW 3 Series Forum - Technical Talk on the BMW E46
    hello all, my first post here although ive been lurking for a while. recently got myself a cheap 320d e46 (150bhp model) auto that i was already aware when i bought needed some work to get it 100%. firstly the seller has apprently replaced what looks to be 2 injectors but not coded them, now...
  19. Injector socket head removal tool?

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    https://drive.google.com/open?id=14qHCtzYqJ1RLyd1wWvpDwyLJGKux96MF where to find this special 29 mm socket? crow foot sockets are going to 28mm and then skip 29 and start from 30mm conspiracy i call
  20. Injector is not good?

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    https://drive.google.com/open?id=1ZIeh2UurWOQf1GV5qvk6rBRas84fYzRv this is bad right? how to fix?
Top