BMW Forums : BimmerForums banner

injection

  1. F13
    Hi everyone. New to here. Although I've been reading alot for many years. I had the EGR Recall done on my 640d 2012 around 10 months ago. Now I have a rough idle on a cold start up and every now and then a drive train error that comes up but goes away straight away. I've scanned with...
  2. BMW ECU Tuning and Standalone Tuning
    I'm thinking to combine remapping with water/methanol injection kit for better performance and mpg(may be ) . Is there anyone who has tried it ?
  3. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi everyone, So winter has arrived and I can't help but to notice that my 320d drives like a different car as opposed to in the summer. In the winter its fun to drive, it pulls like a steam train from 1500rpm, its quick, responsive and just ideal. In the summer when temperatues are around 30°C...
  4. BMW 3 Series Forum - Technical Talk on the BMW E46
    Recently my car sudently stoped, i repaired the vp 44 diesel pump putting a transistor on electronic board on command side of high pressure solenoid, the car started but I have the 44 solenoid valve injection error, on impact is error 68 but in hexa is 44. The car accelerate slowly. An...
  5. BMW 3 Series Forum - Technical Talk on the BMW E21
    Hy guys. If i try to remove the injection pump with will there be the risk of the timing pinion to drop in the engine? Have a nice day guys!
  6. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi if somebody can help me please.. I have a e46 323i 1999..the problem is the fuel injecton stop to send signal rondom some times #3 or #4... AND WHEN I UNPLUGGE THE AIR MASS FLOW. WORK PERFECTLY .. BUT I PUT A NEW AIR MASS FLOW FROM THE DEALER I PAID 400 AND THE PROBLEM STILL THERE...
  7. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi Guys I am a noob with with direct injection engine. I read that these direct injection engine can build up carbon at the intake manifold since no fuel is sprayed at the valves. Any tips to prevent or slow down these build up. Some people suggest Oil Catch Can. My car is a basic 2L N43...
  8. BMW 7 Series - Tech Talk For All Gen Of 7 Series
    Hi, I've got a problem with speed on fuel injection in my motor M73N. Left side of the head cylinder shows between 3.70 m/s and 3.72 m/s on all 6 cylinders, but right side is 6.06 m/s - 6.11 m/s on all 6, which is nearly twice more. "Drinks" between 10-11 mpg, which is a bit to much. Doesn't...
  9. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Blanked my Egr on my 2000 530d now it seems to be in limp mode with no management light on. Wondering if it's related at all on diagnosistics it said; P0404 - Egr Control P0200 - Cylinder 1 injector faulty P1613 - Engine Stability controller Can anyone make any sense of this? As is would the...
  10. Items WANTED - Post any wanted adverts in here
    320d,136hp,bosch vp44 pump wanted,51 plate
  11. BMW 3 Series Forum - Technical Talk on the BMW E46
    I just noticed my 04' 330CI does not have the secondary Air Pump. It's purpose is to inject fresh air into the exhaust manifold, to get the exhausts temperature up to a sufficient operating temperature for the CAT converter to get to work. It generally activates for a short period of time...
  12. Auto Electrical Forum
    Hi any pearls of wisdom on this problem would be fantastic My car is a 2002 e39 520 m54 The other day while driving the eml , engine light and traction light came on outing the car into limp mode, I scanned the codes and it came up with : P0414 secondary air injection system switching valve A...
  13. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hello, i suspect my fuel injection has died, sudden non starter today, and flags a solenoid code relating to the pump. Runs on easy start for a few seconds! Is there any guides on changing the pump, i think a special tool is needed? Thanks 2001 320d m47 136bhp, vp44 pump
  14. BMW X Series - Tech Talk For All Gen Of X Series
    Hi All, I'm new to this site and have absolutely '0' experience in using forums, so please forgive before I start. Can any of you kind folk help on this one? As per the title, I have an intermittent start up fault on my E53. I've had the car for a year now. I've been experiencing a fault...
  15. Introductions
    Hi All, I'm new to this site and have absolutely '0' experience in using forums, so please forgive before I start. Can any of you kind folk help on this one? As per the title, I have an intermittent start up fault on my E53. I've had the car for a year now. I've been experiencing a fault...
  16. Diagnostic Hardware and Software Discussion forum
    Hello guys , i've just put inpa on my car after fixing the engine coolant temperature sensor. After that i had an error regarding to "Coolant heater', but after this fix the error dissapeared. When I put back the intake manifold, i saw that a screw cannot be tight to max..ok i ignored that...
  17. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    E39 M57 an 2002 injection system hello everyone I then injection system that appears when I crush the pedal and j reaches or exceeds 3000tr and more power I switch hands and I and injection system problem until the next big its acceleration again I did scan and error is my rail pressure is in...
  18. BMW 3 Series Forum - Technical Talk on the BMW E46
    hi, just finished fitting a new injection pump to my 1999 320d, what can i disconnect so it turns over but does not fire, thanks.
  19. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi, im replacing my injection pump on my 1999 320d 136hp and have a question i hope someone can answer.I have the dial gauge setup on the pump and have not used one before so the dial guage is zeroed approximately 90 degrees anticlockwise of the timing point and wound clockwise to get the...
  20. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hey, Car: 525 tdsa e39 97' 105kw I replaced injection pump seals, without taking pump off the engine. And I marked pump lid location (this middle section, electronic). But how is it possible to adjust pump lid correctly? Is there some kind of program? DIS/INPA. I know that VW has same type...
Top