BMW Forums : BimmerForums banner

dual

  1. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hoping someone can help! Just picked up a 330d E46, bought it knowing the clutch was slipping, fitted a new clutch and it’s still slipping. Checked the dual mass when replacing the clutch and visually it didn’t look bad at all. Also checked the slave cylinder which again seems fine. The...
  2. Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Hi All, Finally got around to removing my faulty mulf which was interfering with my idrive on start up. I just bypassed it for now. (2006 E63). While I had the back seat off I found a box which was just sitting there, not fixed to anything. See picture attached. I also found a cable (not...
  3. BMW X Series - Tech Talk For All Gen Of X Series
    hi all new to the forum... I've recently like yesterday bought a 2018 x1 90kms on clock.. so I followed my wife home after picking it up & noticed driver side exhaust was the only side that smoke was coming from. is this normal? do both sides actually work? ( apologies for probably a stupid...
  4. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Just wondering if anyone has experience changing from dual to single mass flywheel on E39. Will I notice a driving difference or is it much the same? Wouldn't want to lose much doing the conversion, but it's significantly cheaper so for me kinda hard to avoid just now.
  5. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Does anyone know if i changed my air con unit to a climate control one would it work or does it need recoding? F20 2017 the first pic is like mine the second is the one I'd like
  6. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi I currently have a F10 520D Sport Automatic which has done 180k. I'm thinking of upgrading to a G30 530d xdrive which I notice now has Dual Clutch Transmission instead of the Torque Converter. Can I expect any reliability problems or need to replace clutch plates and fly wheels as the...
  7. BMW Detailing, Bodywork and Styling forum
    Anyone know anywhere near Liverpool that supply and fit a dual exit exhaust for f31 335d?
  8. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Now here is a funny thing. BMW in neutral no noise. Put your foot slightly on clutch then horrible noise. Push your foot to the floor and noise goes away. Hmmm is this a classic DMF issue? or something else. After all aside from the release bearing pushing hard on the DMF why would it sound like...
  9. Items WANTED - Post any wanted adverts in here
    I'm looking for one to dismantle if anyone is throwing one away after a replacement. Cheers
  10. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Seems like my DMF is on its way out. makes that funny noise when you turn off the engine etc . And its done 170k. EURO etc do a good kit and its not bad when they do a weekend special etc But....what else is important to change and make sure its done when going to a garage. Dont want to...
  11. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Guess its going to be a expensive year for my car ! Dual mass is now making a rattle when i turn off the engine etc . What make is better , Luk or sachs ? and anyone recommend someone cheap but good to do the work in the London area ? Thanks
  12. BMW Tuning Forum
    Hi all, I have a e46 330cd after a long stint away from bmws. This one apparently had been tuned at one stage to something like 260bhp. Does anyone know of a supplier for uprated DMFs for this car? Frankly I am happy to go back to the normal tune. BUT, if I am to keep it, I would like to...
  13. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    My 330i has dual zone air con. It will only blow out hot air on the passenger side not the drivers side or other vents anyone had this before it's done it since I bought it and it's doing my head in now. Thanks
  14. Auto Electrical Forum
    Hey guys! I am not sure whether there is a fault here or I am being a bit stupid.... The dual climate control doesn't appear to be working. When I set the passenger at say 23 and my side at 16, both vents on either side appear exactly the same temperature, usually the driver side temp. This is...
  15. TMS Motorsport
    More great items brought to you by: THE MOFF SHOP / TMS MOTORSPORT FS: ARP BMW 2.3L (S14) dual mass flywheel bolt kit Product Code: 201-2802ARP BMW 2.3L (S14) dual mass flywheel bolt kit Price: £60.35 Price (inc. VAT): £72.42 Please see the website for more photos and details...
  16. TMS Motorsport
    More great items brought to you by: THE MOFF SHOP / TMS MOTORSPORT FS: ARP BMW 2.3L (S14) dual mass flywheel bolt kit Product Code: 201-2802ARP BMW 2.3L (S14) dual mass flywheel bolt kit Price: £60.35 Price (inc. VAT): £72.42 Please see the website for more photos and details...
  17. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi folks i,ve just removed an N47 2.0 diesel engine to replace a slipped timing chain,could anyone tell me what to look for with the dual mass flywheel in regards to wear or how to tell it needs replacing,clutch was smooth no judder when driving just a low towards the floor bite point,i don't...
  18. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hello, I'm looking to replace the Clutch and the DMF on my E60 520i 2.2L Petrol (July 2003, 170BHP, 125kW) and I'm planning to buy the DMF in advance and have a local garage fit it. I am totally confused though as I can find two DMF's for my vehicle through Euro Carparts: - LUK 415012210 -...
  19. BMW Garages and Parts Retailers
    Hi for some reason i am having trouble sourcing this these parts for a reasonable price. I have seen the whole kit for E90s for around £300 but the only compatible E92 kits are £500+. (find this odd as i thought it would be the same engine??) Can anyone recommend where to by this and what...
  20. BMW Competition Corner
    Hi I know there have been quite a few threads on replacing an dual mass with a single mass flywheel, but I haven't seen one that gives the ideal answer. Those that I have seen seem to suggest that using a M20 flywheel is the way to go. Has as anyone come across a replacement lightweight...
Top