BMW Forums : BimmerForums banner
donut
1-6 of 7 Results
  1. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    my car passed it's MOT the other day, which was nice. however, it has a couple of advisories - rear pads a bit low and a cracked donut. do i need a rewind tool for rear brakes? and if so, which way? clockwise or anti? also, the tester noted the rear drive donut is a bit cracked looking - the...
  2. General BMW Discussions
    E90 330D saloon - replacing front propshaft donut (doughnut) / Guibo Hi, So I've been having an issue with vibration on the car at high RPM and narrowed it down to something in the propshaft assembly. I got a garage to check this and confirmed the front propshaft donut needs replacing and...
  3. BMW 3 Series Forum - Technical Talk on the BMW E46
    Could do with some help if someone's experienced same prob thanks jon
  4. BMW 3 Series Forum - Technical Talk on the BMW E46
    Well I have officially decided that this is the last chance for my E46. It's an E46 53 330d Touring. I just had : New control arms Powerflex bushes everywhere - FCAB, ARBS, RTABS etc etc droplinks Eibach Pro kit Now , the story goes like this, the indy fitted everything ( no doubts about...
  5. BMW 3 Series Forum - Technical Talk on the BMW E21
    Can you change the prop donut without removing the centre bearing? My donut is ripping itself to bits so needs to be changed ASAP, I've got a replacement but the prop centre bearing has been welded on one side instead of repairing a snapped bolt, I kid you not! I'll fix the bearing bracket when...
  6. BMW 3 Series Forum - Technical Talk on the BMW E46
    Need a new propshaft coupling anyone suggest the cheapest place to get one?:thumbsup
1-6 of 7 Results
Top