I have a problem with DIS program it seems it's just not working properly. INPA works fine without any problem, but when I start DIS program I get a message, data transmission disturbed! What would be the problem? I need DIS because I upgrade LCM to newer SW and with PA I changed VIN...
Im having multiple issues with error codes on my 2008 e60 520d m sport lci with 150k miles on the clock. Ive read all the codes using INPA and DIS. The codes are as follows;
DDE Diesel Electronics OL
4B1C Fuel Filter Heating, activation
4C5E Particulate filter system minimum...
Having worked mainly on E31s for the past 15 years I still use the original MoDIC on an old BMW/IBM laptop, but I need to troubleshoot newer cars now so am looking for a replacement. I would like to get rid of the cables, so is there anything out there with full DIS/INPA functionality (diags...
Hi Hopefully someone can help.
I purchased INPA DIS V57 kit from ebay years ago, from David Wragg Holdings - This came with USB connector and software. It sat in the cupboard for years until I 've needed it at the weekend. I have installed this as per the instructions but cannot get...
Hi I recently purchased a cable and inpa dis software from a company on ebay. After a few hours of installing and lots of support from the seller ( he even helped me install remotely) I plugged into my car. The dis shows no communication the top power bar is empty and it doesn't recognise the...
Hi all, just wanted to share my experience about successfully cleaning (regenerating) DPF based on information gathered from various BMW-related forums - as my big thanks to all those people who commit their time to help others.
The car info: e60 530d (2004) 189K mechanical; rarely driven on...
Its electronic right?....drove the car for 30 minutes to get up to temp...pulled over and scrolled through the toggle but no 'Oil' was displayed?
What am I doing wrong?.....I haven't looked for a dipstick as presumed there isn't one?
This is for a 2009 E92 325d
My steering lock and ignition work fine just seemed to have triggered the dreaded Red steering lock warning light
Anyone around West mids near Birmingham with software and know how to reset the CAS ELV counter ? I’m prepared to travel
Thanks in advance
Hi just wondering if it's possible to re-sync the ews and dme using DIS?
Have an 850 csi that has been sat for 6 years and has lost sync and maybe even the coding between them so the car won't start?
If so I should get a copy of DIS tomorrow if someone could do a step by step guide.
Is there anyone on here that has DIS and in a 'sort of' Gloucestershire location?
I need someone that would be willing to use DIS on my car to tell it that it has a new DPF fitted.
I'm convinced that there is no fault with the DPF itself and am about to sell the car. Want to get it ready with a...
BMW 3 Series Forum - Technical Talk on the BMW E46
As the title says, I've just scanned my 2001 pre Facelift 325i using DIS and it's come up with a few pointers, most of which I can easily work out but there's 2 that I could do with some advice on where to look to fix it....
IHKA - 18 IHKA: water valve - short circuit to negative.
IHKA - 0D...
BMW 3 Series Forum - Technical Talk on the BMW E46
I am one of those victims of the N42 engine. Probably one of the worst shitpieces ever made by BMW.
I cannot afford a new engine or new car now so bear with me please.
Every mechanic who has no knowledge about Valvetronic swears the symptoms manifested by the N42 are Coils/Spark...
Hey guys - got the software for my E63, and I want to program some stuff. When I open SSS and select the car etc, it says 'Communication between diagnostic system and radio head is disturbed' - was wondering how to get round this issue? Also what is TIS? Thanks - Duncan
Hi guys, the last time I used DIS was about 3 years ago on my 07 E91 with no issues but I now want to use it on our 57 E70 but it just wont connect.
Now our E70 is at 160K we are getting both DPF codes 452A and 4D4A as BMW programme in a total running distance for the DPF even if its still...
I recently started getting Error 200.13 - Diagnosis Bus Error when trying to use DIS
No data could be determined from the vehicle. Auto identification was terminated.
Any ideas on what may be the problem?
Car was hitting a wall every time i floored it so scanned it with DIS and it showed many faults.
All 6 glow plugs showed up.
Going to pick up a glow plug controller today and hopefully this will erase all the faults relating to GPs. Car starts up just fine.
I would be grateful for your advice.
Spark plugs 8.000 miles. No problem with the power when driving.
I have some problems with starting the car. Pretty much randomly.
Either its turning too long (5 seconds) before it starts or too short (like half turn).
In both cases its not running...
My car E91 320i 2007 N43 engine , 82 000 miles
Would you have a look at the images from DIS 57. I have managed to do some diagnostics tests of the injectors and few other things but Im not able to tell whether everything is good or not