BMW Forums : BimmerForums banner

cranks

  1. E90 320d not starting

    E90
    Hi, hoping for some help:) My e90 all of a sudden wont start. The car just cranks. Will run on easy start, but cuts out immediately. Theres fuel in the rail and plenty of presure when cranking as I've checked on the obd reader. But it appears that the injectors are not been turned on...
  2. 2008 E87 118D - Cranks but does not start

    BMW 1 Series - Tech Talk For All Gen Of 1 Series
    None starter, car cut out on a drive and would not start again. Fuel level was low so topped up with 5l, changed fuel filter, fuses checked and plugged in to basic diagnostics but no codes. Getting 11.7V pre fuel filter control module with battery switched on, nothing post module until...
  3. 2008 318i (Auto, 145K) cranks up but won’t start

    Auto Electrical Forum
    So about a month ago, I drove to my 318i (2008 Auto) to the shop as usual. It’s never given me any issues or shown any signs of. I’ve only had it for 3months as 2nd hand though (145K). When I got back in the car after less than 10mins in the shop, the car wouldn’t start! Cranked up but no start...
  4. 2005 330ci car cranks but wont start

    BMW 3 Series Forum - Technical Talk on the BMW E46
    This is most frustrating thing in my entire life. I saved up for a yr to by a convertible 2005 BMW 330ci with 105k original miles on it complete with service records. I live in No. California so I buy this car and drive it home it sits for a week and I go to start it up again and it cranks...
  5. Car cranks, but wont start. Gives Transmission Fault on dashboard.

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi, I have a BMW E90 320D. The car have been cranking earlier, and hard to start. Now it is only cranking, and will not start at all. I also get the Transmission Fault message on my dashboard this weekend. My car stands still, not possible to start, just cranking. As a result of all the...
  6. E90 cranks but won't start 318d 2011

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi, the car cranks but won't start. I'm going to change the fuel pump relay but I can't for the life of me find the location. Any help would be really appreciated!
  7. 2008 E70 3.0d Cranks but doesn't want to start

    BMW X Series - Tech Talk For All Gen Of X Series
    Help! Removed and replaced the turbocharger. Refit everything now she refuses to start. Accidentally dropped the battery (cracked, so I replaced it - prior to first attempt at restart) Cleared all the fault codes. As a precaution, I had the EWS re synced. Tried starting a few times but no luck...
  8. E() 320i 2006 - Cranks but wont start after overeheating

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Vehicle ran perfectly but overheated - expansion tank cap - (was not secured properly)blew off coolant sprayed all over the bay mostly on the drivers side - overheating issue fixed with new rad top hose and temp sensor. First symptom the following day only in reverse engine had a power issue...
  9. E87 07 118i Won't start but cranks p101b p1050 p1061

    BMW 1 Series - Tech Talk For All Gen Of 1 Series
    Having some issues with my E87 2007, its got 72k In the morning it started up fine drove to work then after work it just cranked but didn't fire and then engine management come up. Got recovered by RAC who found two VVTI/Vanos faults - 2A61 & 2A6B A bit of back story, when I bought the car it...
  10. 2004 E46 cranks but won't start, blue relay ?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi all , my car , 2004 320d cranks but won't start. The temperature gauge flickers into the red.It did start after a few ignition on and offs. After a bit of searching I discovered the blue relay issue. Has anybody got a part number for this ? Thanks :thumbsup
  11. BMW E46 318Ci Engine wont starts but cranks!

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hey guys I recently replaced my CCV and ive managed to put everything back in place, however the engine does not seem to want to start! Then I plugged my OBD II reader in and it came up with these codes P0120 - Throttle/Pedal Position Sensor/Switch 'A' Circuit P0123 - Throttle Position...
  12. 2000 E46 320d Cranks but won't start

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hello, my e46 was parked for 7-10 days (cold days) and after, when i wanted to start it, i had a surprise. It wouldn't start. The first try the engine started or wanted to start for like a quarter/half a second but died. After that, nothing. It cranks but won't start. I put a tester on it and it...
  13. URGENT! 1998 320d started and dies after cleaning egr. Only cranks now

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Hello, Today i've cleaned my egr valve, and the connection to the intake manifold. It was clugged up. Cleaned everything out, also replaced the themostat. I started the engine after all that to bleed the cooling system, it was a bit harsh the first seconds (sputtering a little) at idle, but...
  14. 1 series cranks but won't start

    BMW 1 Series - Tech Talk For All Gen Of 1 Series
    My BMW 1 series won't start! The car turns over but won't start. It has been plugged into several diagnostics machines and none of the have registered a fault. It has recently had a service and a coil pack NO:3 replaced. We had it serviced due to it fluttering when idle, but the mechanic...
  15. 2001 E39 520d 136hp - Won´t start after suddenly stopped, cranks, pre pump ok

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi mates, my e39 520d, on the morning after being working for about 1 min, suddenly stopped and won´t start anymore, i checked fault codes, there was something about comunication with pump module(can´t remember exactly because i deleted and never showed up again). Now i have 2 fault codes...
  16. E90 325d cut out . Cranks won't start

    Auto Electrical Forum
    Hi. I'm having trouble with my e90 325d 2006 . Had a engine rebuild finished last week. Run perfect for 48 hrs then cut out and won't restart. Came up with fault code 4691 dde power supply. Crank sensor now replaced twice And 1 glow plug that had gone to Earth now replaced Still won't start...
  17. Installed new starter motor, cranks but doesn't fire. Got p0193 code.

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hello guys. I installed a new starter motor and battery, the car didnt used to crank with the faulty starter but now it does but the problem i have now is that it doesnt fire. I did a fault scan and i got a P0193 code which is Fuel Rail Pressure Sensor Circuit High Input It did have a tuning...
  18. BMW 520d 2011 F10 WON'T START? PLEASE HELP!

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi everyone, Im actually new to this forum but always read on this as it's great help! I have a massive problem with my BMW 520D 2011 F10 and was wondering if you guys can help me please. I was driving on the A12 about 65-70mph when all of a sudden I heard a loud bang noise and the car speed...
  19. 320d e92 Rail pressure problem, car cranks but won't start

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi, Hopefully someone can point me in the right direction; I have a 2007 320d e92 M Sport, driving to work this morning about 10 miles into the journey, I lost power wile accelerating from 30 - 60, the engine cut out and I got the engine management light: Managed to pull over, waited a few...
  20. 1997 740i - Cranks but doesn't start when warm. Surging idle. Stuck revs.

    BMW 7 Series - Tech Talk For All Gen Of 7 Series
    Hello All, Having quite a few problems with my trusty steed at the moment. First noticed the problem when leaving the car for 20 mins at the weekend, it took quite a bit of cranking to finally fire up. After this i noticed the following problems when driving through town: Intermittent surge of...
Top