BMW Forums : BimmerForums banner

coded

  1. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi All, Wanted to see if I might have a CIC with DAB in my 2011 E91, so decided to add $654 to my FA. After writing FA and coding the CIC module, I now have the DAB option in my Radio menu. :hihi Does this confirm I actually have the CIC+DAB unit? When I choose DAB, I see 'All ensambles'...
  2. Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    I have a 2007 E61 LCI 523i. VIN decoder tells me that I have option S694A on my car [Provisions for BMW 6 CD changer]. realOEM.com tells me that the CD changer unit I need is 65129131850 (plus the cartridge) http://www.realoem.com/bmw/enUS/show...diagId=65_1312 Question: If I buy one of these...
  3. General BMW Discussions
    I recently bought a 2008 330D Touring without a radio in it. I found several suitable ones on ebay, so today I phoned the local BMW dealer to see if one can be unlocked for my car. The dealer told me that BMW radios are coded to the car they came with and can't be fitted to other BMW's, however...
  4. Auto Electrical Forum
    Hi All - My 320i started to give me a battery warning so I started to look into a replacement battery. I was concerned that I would need to properly register and possibly code the new battery, so I got a cable and got the various software working. I discovered a few oddities and I am not...
  5. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Good evening all, I've coded in AUX using NCSExpert this afternoon. This is the first time I've ever coded in anything and it took me ages owing to constant errors and faffing around with the software. A big thanks to Mike's Easy BMW Tools which came to the rescue. I followed procedures...
  6. Diagnostic Hardware and Software Discussion forum
    Read somewhere it changes the audio output to flat/lower level (about half apparently)....basically i have rigged up a gladen loom, speakers to an aftermarket amp and only issue is the output freq is tad to high I'm having to keep my amp gains low just to keep it down, fine for music...
  7. General BMW Discussions
    Hi was using ncs expert to try to get day light running lights working and have some how removed sound from my parking sensors ? I'm not sure how I have but I have checked pdc module with ncs expert and all looks OK , put my ear to each sensor and all are working. I just get no sound through...
  8. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Good evening! I'm having some weird issues with my '05 525d that I'm not able to figure out. First of all a little history of my car; May 2015 turbo breaks down, dpf and cat clogs up due to faulty thermostats. Removed cat, dpf and egr and upgraded to a brand new 530d-turbo and got it back on...
  9. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    So I got kind of sick of having to make new CD's every time I went on a long journey and then having to fill the CD changer which had no CD Text. I also just bought a new Bosch S5 battery in the Eurocarparts sale (extra 10% off) that I needed to code to the car (that's easy to do with INPA)...
  10. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    After a fair amount of faff I've finally managed to code the newly installed AUX cable to the car. Here's a photo of the finished article. I chose to fit the AUX Input high up near the idrive screen so I can reach my phone without taking my hand off the wheel and also not have a long AUX cable...
  11. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hey guys, Got my car coded with a few cool features recently and thought I'd share some videos so you guys can see what each feature does. Some are pretty straight forward but I still captured them in case people were wondering. I'll keep updating this post as I get time to film more of the...
  12. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi guys, This is my first post and have tried a few search but cannot find the exact answer. Just bought a 2010 330d saloon and after an hour of driving the engine management light has Come on and with my code reader (ebay £20) and I have the following two codes. P3043 and P0401, I understand...
  13. BMW X Series - Tech Talk For All Gen Of X Series
    X1 E84 coded cruise control installation, wiring are OK, I want to know how to use the NCS-Expert Coding, or increase which VO, set up code which module? As far as I know, the 2013 E84 later installed before you can directly use the cruise control. 2014 currently unsuccessful.
  14. General BMW Discussions
    I was just wondering how common it is. I know BMW stopped officially doing it after 2006 due to too many warranty claims in the US for worn/broken motors I guess. Is it worth the risk for it to be coded by someone other than BMW for the cool factor? I assume BMW won't want to know if...
  15. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Quick Questions Do they have to be coded when replaced. Can you read the current codes in DIS44 ( without BAT/IGNITION sensing) I ask the first question as our local autoelectrical and injector refurb place say. " The injectors are not coded on this vehicle, but you can change (slightly) the...
  16. Diagnostic Hardware and Software Discussion forum
    E46 saloon folding mirror module behind glovebox,can it be coded to the keyfob? As in the title,i have recently retrofitted folding mirrors to my car and im wondering if the mirror module that's behind the glovebox can be coded in any way to fold/unfold the mirrors using the key remote.I have...
  17. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi guys! Hope you can help me on this one. Just got a 2003 E60 530d. It has M-ASK, dvd slot for business nav and 6 cd changer. MP3 CDs/DVDs play fine (I assume it has been updated since launch), but I wanted the aux in. SO! I bought a CAN/BUS OBD2 cable, and used NCS Expert to add +NAUX to...
  18. General BMW Discussions
    Can you get these anywhere..? Ive looked and looked but havent seen any original or aftermarket
  19. General BMW Discussions
    Hi all, the exterior plastic plate on the e36's sunroofs...how are they removed? as mine needs to be sprayed *satin black roof:thumbsup* bonnets allready done:) cheers edit: its a 1996 saloon.
  20. BMW Detailing, Bodywork and Styling forum
    Basically as above, when i first took the mouldings off it was with the intention of going gloss black but im starting to like the idea of all colour coded to white :) comments please. this is how she looks with the trim removed.
Top