BMW Forums : BimmerForums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Diagnostic Hardware and Software Discussion forum
    Got a 2003 530d sport with nav and all the gadgets. Used carsoft 6.5 for the first time to reset the dash language from French to Uk English. Abandoned the E39 'vehicle coding' write first time round then did it again to completion. Now my language is english but the rev counter doesn't work...
  2. Diagnostic Hardware and Software Discussion forum
    Sorry to be a pest but OK finally bought carsoft 6.5. (and got the s/ware to work) Connected using the OBDII plug and the only module it sees is the DME which has no faults. All other modules don't respond. Connected using the round plug to the skt under the bonnet and it sees the DME module...
  3. Diagnostic Hardware and Software Discussion forum
    Hi I'm Looking to buy a interface box to work with carsoft were can i get one of these, My mate gave me the software ,20 pin cable and I've a laptop with 9 pin serial port, but need the 9pin interface box looking for it to work with a E36 325 1995. Thanks
  4. Auto Electrical Forum
    Okay, so i finally got carsoft running (barely) and it would only run DME scan, which it did and i got the above code (65 camshaft angle pulse generator)... after reading up on various forums it seems its the camshaft sensor.... BUT WHICH ONE?!? apparently on the 323 there are 4!! of these...
  5. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi guys so i had bought the carsoft software and leads and got it working cleared all the errors and waited for the eml to come back on. well it did today and i checked it and came back with two faults so your help would be much appreciated. first fault is: Single diagnosis DME / DDE -...
1-5 of 5 Results