bmwx5

Hi all, I have a BMWX5 2007 , driven 70K miles. The dashboard started showing "Engine oil pressure too low; Engine damage possible" and engine making a rattling noise all the time. Here are some photos and recording of the car and engine with the rattling sound...

Does this trim fit for other models of BMWs as well? http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=130378317124&ssPageName=STRK:MESELX:IT And has anyone installed one before. thanks 4.6is:thumbsup

Hi :) I am trying to remove the airbag on the steering wheel on my 54reg X5 (facelift model). I am changing the steering wheel trim as mine is worn. I have read various threads on different sites that say i should poke a flat head screwdriver in the wholes on the back of steering wheel to pop...

I have a 2001, x5, 3.0i, petrol, auto. And the transmission safe mode warning came on. I took the vehicle into 2 transmission specialists and they informed me that there was water in the gearbox caused from the oil cooler. I have just been to collect the car from the transmission garage who have...

Can anyone please help me! I am upgrading the audio system in my 2006 x5 from the standard factory fit (which i dont think is that good) to an aftermarket one. I am trying to find a good combination of speakers amp and head unit. Does anyone have any suggestions? I have already found a company...

Car on arrival Washed using Zaino Z-7, clayed with Z-18, wheel with AS Smart Wheels - didn't go to mad with these as Mark had a new set of 22's to go on a cpl of days later. Once dried off inspection time And the worse bit last, didn't even need any lights to show this bit...

I recently changed the front pads and sensor on my 2005 X5 3.0D, I now have to change the rear pads also. When I changed the front ones I struggled pushing the piston back into the caliper. Is there any easy way to push the piston back, maybe a undoing a srew or some otherway to release the...

Hi I have a problem with the passenger front door on my X5 3.0d 2005. The door doesn't close properly, after investigating the U shaped metal fixed to the car where the door lock makes contact has come loose. When the door shuts it rattles only slightly but does not fit snug into the opening...