BMW Forums : BimmerForums banner

1983

  1. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi all new to this writing to you from New Zealand I own a classic 1983 635csi and have lost the front right bumper cap the piece that sits near the wheel arch could someone please point me to a parts supplier that may have one and can export to NZ I have attached a picture [ATTACH=CONFIG]194417...
  2. Introductions
    Hey i'm new to the forums so apologies if this gets posted incorrectly. I currently own a 323i e30, 2 door saloon. It has come to the point where i may have to sell it as it needs some time put into it which i dont have much of due to a recent addition to the family. I dont think it needs loads...
  3. Technical Guides for the E12, E28 and E34
    Hi Guys, I drive a 1983 BMW 528e with 230,000 km and I've been having some idle issues. Initially it was idling a bit rough and hunting slightly between 700-900 rpm. I removed and cleaned the ICV and now it idles rough at 1000 rpm when cold and 1200 rpm when warm. When I'm shifting and I put...
  4. BMW 8 Series Forum - Technical Talk on the BMW E31
    Guys, I suppose what I am asking is have I carried out the checks correctly and if so, what could be the root cause of the battery drain. I believe the drain is excessive and have lived with it by compensating with the aid of a battery conditioner connected when not in use. Now its time to...
  5. BMW Detailing, Bodywork and Styling forum
    Hiya all, I am about to purchased a low mileage big 6 - a 1983 E24 635csi. It is a nice car but it has been repainted and my plan is to have a ground up restoration to make the car concourse since it has that potential. I wonder what is the availability of interior parts for this car? Are...
  6. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi, I've sold the E24 and now only have the E46. I've also defected to Porsche, bought a 924 Le Mans. Will I be drummed off the forum? David.
  7. E28
    Regards Bent
  8. BMW 3 Series Forum - Technical Talk on the BMW E21
    hey all.. so my 83 320i is havin some issues with the clutch pedal. i replaced the clutch master and slave about a month ago and all was well for a little while. but now my clutch pedal only has to be pushed in about a 1/4 inch in order to shift gears. i have tried bleeding the line out but that...
Top