BMW Forums : BimmerForums banner

Search results

1-20 of 494 Results
Advanced Search
  1. Potential blown turbo

    BMW X Series - Tech Talk For All Gen Of X Series
    So yours is post 9/2005 with M57N2 engine? On these the manifolds are better but a cracked manifold or loose manifold bolt would still be more plausible than cracked turbo housing.
  2. Engine code E60 2008 535D m sport

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    M57N2(TOP) = M57D30TÜ2TOP
  3. Japanese Import E61 starting problem

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Can you give a bit more specs of the car, engine type?
  4. What should this electrical connector be attached to?

    BMW 1 Series - Tech Talk For All Gen Of 1 Series
    It could be easier if we knew the engine type. Even better if you check the codes and see if there is something pointing to missing signal/component.
  5. Potential blown turbo

    BMW X Series - Tech Talk For All Gen Of X Series
    More likely cracked exhaust manifold. These original stainless manifolds are prone to fail.
  6. R 93 grill fittings

    BMW 3 Series - Tech Talk For All Gen Of 3 Series
    They are just decors.
  7. Any free hacks for my 02 E46???

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Nope. Mirror heating is automatic outside temp dependent feature.
  8. 2002 E46 330CI, potential head gasket failure?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Exhaust gases (CO) in coolant can be tested if you suspect head gasket. Pressurise the coolant system to find the leak (with cool engine so a small leak won't evaporate so easily). Dye can also be used to find a coolant leak.
  9. Engine running lumpy, possible injector?

    Technical Guides for the E90, E91, E92, E93, F30.
    That code for smoothness regulator means one or more injector correctional values are beyond limits. So you need to check those with proper diagnostics.
  10. Huge repair bill due to broke glow plugs (e91 330d with N57 engine)

    General BMW Discussions
    I think M10x1 Time-Sert inserts can be used.
  11. E39 525D M57 still won't start...

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Didn't you previously say that the starter clicked? Test the starter like snowblind suggested.
  12. Huge repair bill due to broke glow plugs (e91 330d with N57 engine)

    General BMW Discussions
    Those glow plugs can be removed without removing engine or head. Just some special drilling and tapping tools needed. Injectors removed and compressed air guided into cylinder to prevent debris getting in there while removing the glow remains.
  13. e61 530d 2009 dpf.

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    EGR stat is made by Behr/Mahle and can be bought as after market part. But for main stat you should always use original BMW because similar is not available as after market part. The original is made in Austria and most of the after market parts the same made in Italy crap. Then there is also...
  14. E87 Faulty turbo actuator

    Auto Electrical Forum
    Give me the VIN in private message if you don't want to put it here.
  15. E87 Faulty turbo actuator

    Auto Electrical Forum
    Can you put the VIN here or tell the manufacturing date and does if have DPF or not (EU3 or EU4).
  16. Which E90 BMW DSC Control Unit Part?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    Contact them and ask what was the actual fault code and were they talking about the module or hydraulic block.
  17. Which E90 BMW DSC Control Unit Part?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    What is the actual problem why you are going to change DSC module? Could it be the common 5E20 internal pressure sensor fault?
  18. e61 530d 2009 dpf.

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    You would think so. Engineering minds do go mysterious ways.
  19. E46 Auto Door Lock Feature: How to disable ?

    BMW 3 Series Forum - Technical Talk on the BMW E46
    VERRIEGELN_AUT_AB_X_KM/H VERRIEGELN_XKM/H_SENDER_1 VERRIEGELN_XKM/H_SENDER_2 VERRIEGELN_XKM/H_SENDER_3 VERRIEGELN_XKM/H_SENDER_4 aktiv->nicht_aktiv
  20. E39 525D M57 still won't start...

    BMW 5 Series - Tech Talk For All Gen Of 5 Series
    If the starter clicks there is activation on the solenoid. So if you can turn it by hand either the new starter is not working correctly or there is not enough power from battery to starter motor. Have you checked voltage with multimeter in engine bay? Check engine ground cable or connect a...
1-20 of 494 Results
Top