BMW Forums : BimmerForums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 344 Results
  1. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi all, and help with this one pls!!? Full obd message is: 273D00 code: Engine speed monitoring: Difference between Crankshaft and Camshaft positions too high. I spoke with a previous owner and he said the timing chain was replaced. (This was before I found out there is 3 timing chains)...
  2. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Whist diagnosing a boost issue (it was the manifold pressure sensor!), I found some interesting information on the exhaust sensors. I noticed that "Exhaust temperature before cat" value was -50c and "DPF remaining mileage" was 250,000. I'm assuming -50c means that the sensor is unplugged...
  3. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi, Does anyone have any experience (good or bad) with non OEM NOX sensors? BMW sells one for £450 while eBay has 'original' sensor for about £280 and non-original knock offs for about £180 Please share your thoughts
  4. BMW 1 Series - Tech Talk For All Gen Of 1 Series
    I have just got a 2013 E82 which came into me with some parts missing on the front. Has anyone got any pictures of what should be behind the bumper? I have had to buy a pedestrian sensor with bracket and foam, along with a new bumper etc but I can't figure out where a small sensor lives that I...
  5. Technical Guides for the E46
    I had to change one of the DSC sensors, and they are a bit of a pig to undo with standard tools. It's 27mm hex head. A normal socket wont fit due to the connector. A deep 27mm is too long and hits the body (plus there's no way a ratchet handle would fit). A standard combination spanner hits...
  6. Tyres and Alloy Wheels Forum
    Hi, I have bought two Schrader tyre pressure valves to replace damaged valves on my 2015 420d. The new valves need programmed to the car so it can read the info from them but I don`t know where to get the code from. My garage has the coding device but no code came with the valves so I`m at an...
  7. BMW 3 Series Forum - Technical Talk on the BMW E46
    I've found that Russian site for the E46 service manual. It mentions a "you must reconcile using DIS (Diagnostic Information System) by selecting the "Additional Functions" menu item." Does that mean recalibrate somehow, and it's just a poor translation? What is the procedure to...
  8. General BMW Discussions
    I'm looking to replace one or both of the DSC brake pressure sensors on a 2004 320d E46. Are there any non-BMW parts recommended? Ebay has lots of cheaper alternatives, does anyone have a known good supplier (ebay or otherwise), and not one of the Chinese copy parts?
  9. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hello all, I have e46 318i N42 105kw Today BMW diagnostic tool showed bad o2 sensors on bank2. I opened real oem page and I got confused. I can see 3 pcs of catalyc converters and 5 o2 sensors? Could someone show me numbers for bank2 sensors I need to replace?? https://ibb.co/SdLfSKy Thank you
  10. BMW 7 Series - Tech Talk For All Gen Of 7 Series
    After my ecu packed in, I have fitted a Emerald stand alone ecu to get up and running. The auto electrician, who is doing the work, is trying to find a more compatible TPS, as the standard one, doesn't give enough info. Must add, this is for a 1982 735i. I was wondering if anyone has modded...
  11. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    One of the front PDC sensors on my E61 recently threw a wobbler and caused the system to throw a fault. I replaced it with a genuine used BMW part but, while it works and the fault no longer appears in iDrive, it constantly thinks there is an object 46cm from the bumper even when there’s nothing...
  12. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hi all, E46 318i 2003 I'm looking to replace a cam shaft sensor again. I swapped one for a genuine used on a few years back. Only thing is, now when I'm looking on euro car parts, eBay or anywhere else all of the sensors now seem fatter? The original ones (that i took off) have a fat base...
  13. General BMW Discussions
    What's normally done with brake bleeding when it comes to changing the pressure sensors? Is there any point at bleeding from the caliper?, or is there enough fluid seeping out when changing them not to be an issue with air in the system?, or does the air make it's way back to the reservoir...
  14. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Where’s the best place to buy level sensors for the air suspension for a e39 530d?? Sent from my iPhone using Tapatalk
  15. Auto Electrical Forum
    So I bought a 2015 bmw 1 series. It came with the comfort pack so has rear parking sensors that are activated by putting the vehicle into reverse. I also have front sensors but I can't seem to work out how to activate them. I don't have a button either. Could the BMW dealer have removed...
  16. General BMW Discussions
    Originally posted this in the E90 technical forum but realised experience with any model would probably work for me! 320i E92 has been running pretty well since it was recalled and I got all of the freebies, but I'm still throwing a Low Pressure Fuel Sensor code, and with 90k on the clock it's...
  17. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi guys, Can you tell me if o2 sensors are faulty ? There are 2 faults in ECU 0x29CD 0X3070 What's causing these faults ? Thanks
  18. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Cars been running pretty well since it was recalled and I got all of the freebies, but I’m still throwing a Low Pressure Fuel Sensor code, and with 90k on the clock it’s probably also time to swap out the Vanos solenoids. It’s in for a service next week, might get the mechanic to replace these...
  19. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all I have a BMW 320d 2010 M sport Lci. The car was parked up for a few months and had a flat battery. Ever since, the rear parking sensors and reverse lights have not been working. There is no noise at all from parking sensors(no clicking either). I changed both reverse bulbs but that did...
  20. BMW 3 Series Forum - Technical Talk on the BMW E46
    Hey all, recently replaced 2 parking sensors on my 320ci m sport. All click fine now but upon opening inpa I can see that the 2 sensors I replaced are recognised but do not give readings, the sensors I got were from a local car parts supplier and as such I can get a refund as the clearly are...
1-20 of 344 Results
Top