BMW Forums : BimmerForums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 157 Results
  1. Auto Electrical Forum
    Can anyone code an M3 cluster so it will work in my 335i? Both E92s. Willing to pay obviously Any advice appreciated
  2. Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    5* reviews across Google but nothing on here (unless I missed it). Anyone used them / have experience?
  3. Diagnostic Hardware and Software Discussion forum
    Had my 1 Series F21 2016 for 6 months now and it came with custom headlights which are great apart from one issue that I've put up with, it keeps flagging an error on Idrive that there’s a fault with the “Side/daytime Lights” & “Headlight Aim Control”. Just to be clear, my lights are absolutely...
  4. BMW 3 Series - Tech Talk For All Gen Of 3 Series
    Hi all, recently bought a 2007 E92 325i - When I initially bought it the cruise control didn't work and I had a warning symbol display whenever I tried to use it, Plugged it in with a general code reader and the fault code that was stored was that the Instrument Cluster was not coded for Cruise...
  5. General BMW Discussions
    Hey everyone, I’m sure this has been posted a number of times, but hoping if anyone has any up to date details. A year or so ago I had the 6WB cluster retrofitted into my F10 520d, loving the cluster, however I am looking to move the car on now. And if anyone does a VIN check it’ll be glaring...
  6. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi all, My E60 (2006 520d) has the airbag light on for the following: 93F8 State: Current ACSM/MRS: Anchor-fitting tensioner, driver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 93D7 State: Current...
  7. Diagnostic Hardware and Software Discussion forum
    hi all, i am a new mechanic and i was trying to code some modules i replaced using ista/p on my 2009 bmw 118i e87. all the programming went well but trying to code the modules didn't work at all and now my car has errors for the pdc and cas modules. i think the issue was that i didn't bridge the...
  8. General BMW Discussions
    Hi bmw fans I've got an M135i 2015 and I'm thinking of coding a few options in. Is playing around with the app and coding things in 100% safe and won't mess with your car or destroy any modules? I am thinking of going to a professional to do the coding but from what I am reading most of them...
  9. Auto Electrical Forum
    The expertmode profile is always named "default" once you install the INPA and NCS Expert. In order to code and program any bmw feature, you need to setup the so called "expertmode" profile so in this video I will show you how to set it up. In the video I revealed the password which is: REPXET I...
  10. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Good afternoon all, I'm being mentally tested by my 645ci (2004) and in need of help.. I recently bought it, and found the right dipped beam bulb was out. The rest of the cluster works (angel eye side lights, full beam etc). I changed the bulb, nothing happened. The fault on the dash still...
  11. Diagnostic Hardware and Software Discussion forum
    Is your BMW Xdrive shudders at low speed while steering left or right from standstill , followed by jerky acceleration and makes chugging noise or kind of a shaking?? You just have to recalibrate your Transfer case, watch how in video below 👇 !
  12. Diagnostic Hardware and Software Discussion forum
    Hi all. I want to share my experience with BMW coding. I have used scan tool Launch X431. Unlock all doors when car stops and turn off the engine” In order to code that option you need to access CAS module of your BMW and change it to ”enable” You can also change your preference if you whant the...
  13. Diagnostic Hardware and Software Discussion forum
    Hi all , I am going to show you how to code with NCS Expert and our task will be to setup the radio frequency of your BMW . This video will be very helpful for those of you who import bmw cars from USA, Japan, Europe. For example - the FM broadcast 📻 in the United States starts at 88.0 MHz and...
  14. Diagnostic Hardware and Software Discussion forum
    Hi everyone 🤗 !!! I decided to share with you how to create a profile with NCS Expert, instead of searching and downloading existing one. I will just show you 👇👇👇 how to create expertmode profile in NCS Expert so you are able to program and code your BMW with NCS Expert.
  15. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hello everyone! I have a bmw e61 lci 525d 2008 that wont start and i got the error code 4a63, googled around and found guides about syncing dme and ews and how to do it with inpa. But when i try to go into my inpa on the correct engine that is m57 but i get an error saying that the module thats...
  16. Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    hi there 2014 bmw 1 series 120d m sport just seeing if anyone could help me code a few things into my car or guide me in the right direction looking for a digital speedo and a warning messes coded out (adaptu e headlight failure but they work? hah) If someome could help or give me a quote...
  17. E84
    I was wondering if there is anybody local to me in the northwest that would be able to code enhanced Bluetooth for me on my 2013 x1 e84 willing to pay just don’t have the equipment to do it myself thanks in advance
  18. BMW 6 Series - Tech Talk E24,E63,E64,F12,F13
    Hi, Is there anyone that can do remote coding for my E64 that ive done the CIC & Combox retrofit thats got a couple of issues. Thanks
  19. Car Audio, ICE, Car Alarms, Mobile Phones, I-Drive
    Hi, I have E60 530D 2003 small iDrive. and I would like to code in AUX cable. I have installed the cable already, but needs to be coded. I do have NCS Expert and I have tried following a video how to code in, but it doesn't show. Is there someone in the Milton Keynes, Northampton or Bedford...
  20. BMW 5 Series - Tech Talk For All Gen Of 5 Series
    Hi, fitted folding mirrors to 2004 e60 530i but went to code in ncs expert but no KGM module is present. Anyone know a work around help would be appreciated.
1-20 of 157 Results
Top