Hello guys , i've just put inpa on my car after fixing the engine coolant temperature sensor. After that i had an error regarding to "Coolant heater', but after this fix the error dissapeared.
When I put back the intake manifold, i saw that a screw cannot be tight to max..ok i ignored that because with the other 7 screws and 5 nuts the intake it's tight.
As you can see in attachements Sprintzbeginn Soll(Time injection) its -1.06 and allowed values are between 0 and 20, and the second photo Luftmasse(Mass air) is 39 at idle, and the allowed values are between 0 and 16.
And i have also two errors when i read the memory.
5 Needle-motion sensor
Signal open circuit or KS after B+
Plausibility with Speed(rpm) sensor-Pulse
66 Control unit DDE (EEPROM and configuration)
Wrong injection time is related to needle motion sensor ? Any ideas if these readings are big issues? I feel a little lack of power, maybe it's placebo, but i want to be sure that are no big issues. The cars runs pretty well, without smoke, and with stable idle at 830 rpm.