Right i've tried 3 versions of inpa,non when loaded give me the option to start obdsetup.exe from hardware.When i open c:ediabas/hardware the only option is ads.setup.
Is this significant? perhaps my lead is duff?is there a way to test,it lights up when plugged in.
Until i find a version that gives me the option to run obd.exe instead of ads i'm stumped.
On a more positive note,today i've done an oil/filter change and fitted my new hids all is not lost,lol.
AFAIK if you have USB type interface cable it will not work in ADS mode it has to be in OBD mode...
your INPA software maybe default loading in available ADS mode only (older smaller version)..
ADS mode it will talk to all the car systems on any age of car 20 round pin or OBD2, but it has to be serial double kline interface aswell to access the lot for later cars and before 2007...
still learning myself so its not gospel but so far its wot ive read about INPA and mine works fine on ADS with a double kkline serial interface OBD2..
Done a bit of digging from what i've read this version should work for me INPA-EDIABAS-80X
I am having the same issues as undettered so any help would be good.
There's a known working version linked to from here.
I suspect the problem you have is Inpa is configured to try to use the wrong interface, running obdsetup and modifying the OBD.ini file should hopefully do it.
|« Previous Thread | Next Thread »|