Good Morning Gents
What follows is a tale of woe but ultimately success. Came out to my car four weeks ago, press start, brake light in amber on, steering fault on, no cruise, no self cancel on indicator, no remotes on steering wheel, windscreen wiper only works on intermittent and can't be stopped! Oh and the TPS won't reset.
Now two years ago I bought a cable from Ebay, comes with free software. Load up Inpa, connect to the car, Dsc info, Dsc cannot see any switch actions but it works itself. Best guess is the cluster on the steering wheel has packed up (after many hours of trawling the web).
Used cluster found on ebay and fitted, this in itself took seven hours, all of which involved removing the airbag. Trust me, when you work it out, it takes about two minutes.
Hurrah! everything works except I still have a dsc fault. Inpa shows SZL coding error 5E3F. Can't clear the memory, hard fault.
Ok, back to the web, everyone uses NCS Expert, I have a 64 bit machine, won't run. Winkfp, can't import assembly line data, and in trying to I trash Inpa, Progman and Dis. See my other thread with the trouble I had to get that lot to work!
Ok, uninstall and reinstall Dis and Progman. Progman says I need to reprogram 10 modules and recode the dsc, no chance, I think that's because my car was built after my software came out.
Ah, Tool 32, can this help me? Very little info on the web. Let's have a play. Inpa UIF function shows the dsc has my vin. Tool32 shows the same. SZL_ lessen, no vin details. Omg can it really be this simple. cd_szl_schrieben , yes it can, lights out, test drive, no problems, back to Inpa, fault memory cleared. Tps reset. Hopefully something in this may be of use to someone else.