washed car last weekend, literally moved it from the garage 20ft washed it then went to start it and 4 errors appeared on screen.
1. Drive control Syst.em! Drive Moderatly. Drive control System Failure.
2. When engine is off, Gear position P is Engaged Automatically.
3. Gearbox Functions Impared. Possible risk of Gearbox Failure!
4. Function of Airbags, Belt tension Limiters Faulty. Ensure your seat belt is Fastned.
this car has been a peach.
I bought Carsoft 6.5 but cannot seem to get it to work. no power getting to the interface, neither of the 2 green leds lit, its saying in Carsoft faulty cable?
if anyone could check wiring colours for me in the OBD11/Serial lead, Scart type plug End, and let me know if it has been soldered wrong.
brown wire pins
4 and 5 pin is brown wire, bridged together?
7 pin isred wire
8 pin pin is orange wire
15 pin is yellow wire
16 pin is green wire
Right just done a scan and it threw up, maybee somone may know somthing the diagnosis tool /Snap on one would not read fault 4 Above?
282c CANSZL signal failure
5147 CAN Time-out SZL
5EF4 Steering Angle Sensor: Control Unit Internal
Ecu Type: GS19
Part number 7534929
Hardware number 40
software number 03
coding number 00
Diagnosis index (Hex) 0200
Mant thanks Tony