Now I have my car running I'd like to check it over using INPA but I'm having problems talking to the DME's. I have the correct ADS interface and Serial port settings on my laptop, I can connect to other modules on the car with no problems.
When I try to connect to a DME I get the following message:
SYS-0002:ECU OBJECT FILE NOT FOUND. Program will be stopped.
REQUESTED CONTROL UNIT: 'DME17_2R, DM17_2R1' not found. Control unit found: "program will be stopped!
I'm assuming this is down to my DME having a slightly different firmware than the standard M70 DME? or is it because the actual file INPA/EDIABAS needs to decypher the data is missing ?
Any help would be greatly appreciated.