I have a very puzzling setup in my fusebox.In my fusebox fuse number 23 is empty,as in there is only one contact visible.
In all the wds wiring diagrams it shows fuse 23 is for auxillary water pump but my pump is working off fuse 62 which is meant to be for the water valve.
Not one diagram in wds shows fuse 62 as being for water pump,but every diagram shows fuse 62 as for the water valve.My car does not have aircon and it only has the basic rotary knobs for heating control.
The reason im asking about this is i intend to install aircon and the guide states fuse 62 for the water valve.Could it have been an error at the factory?Should i swap over fuse 62 wire to fuse 23?
Any input would be great.P.s the car is april 2001 built.