BMW Forums : BimmerForums banner

E46 2004 320d Sport - adding a new circuit

961 views 2 replies 3 participants last post by  sam1832 
#1 ·
Hi,

I've bought one of these http://cgi.ebay.co.uk/ADD-CIRCUIT-F...cles_Terminals_Cabling_ET&hash=item3a5bffa0ae in order to wire in a brodit phone kit to my car.

Here are the photos of what I'm working with...



and a close up....

http://www.glowfoto.com/static_image/04-074629L/4826/jpg/07/2010/img5/glowfoto

How do I go about connecting these two wires?

The label on the phone charger says 'CAUTION! For polarity reverse protection purpose please read below carefully before using: White wire "-", Red wire "+"'

Thanks for your help.
 
See less See more
1
#2 ·
Not sure what exactly you trying to do , but usually the RED it's a + and the other one it's a - ground.
I guess , what the intended purpose of this kit it's to replace one of your fuses with this 2xfuse holder.
One fuse will be your original and the second one it's for the kit itself.

Add the white to the ground , and the red to the output from the fuse holder.
If you need constant power for this , find a fuse that has constant 12v when no ignition , if you need ignition , replace one of the 10amps fuses that get 12v when ignition on.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top