I've got a 328 that I use for drifting and the abs light is on, this isn't a problem coz I don't want it on anyway. However because the abs controller isn't sending a sped signal to the ECU it limits the engine to 5300rpm.
I'm going to connect the diff speed sensor directly to the ECU. I know I can get the feed from pin 2 on the blue plug on the clocks.
I've been told I can connect this to pin 15 on the ECU or pin 9 on the X20. However I was thinking it would be more convenient to run the wire to the foot well and just connect it to the output on the abs connector.
Does anyone else know what pin to use on the abs plug?