2006 E46 330cd convertible window switch

Notices
 

Thread: 2006 E46 330cd convertible window switch

Reply to Thread
Results 1 to 4 of 4
  1. 2006 E46 330cd convertible window switch 
    #1
    Bimmer Fan
    Car Details
    nickaroo's Car Details
    Model of Car:
    330cd
    Year of Manufacture:
    2004
    Transmission Type:
    Manual
    Car Body Type:
    Convertible

    Join Date
    Jun 2012
    Location
    Bristol
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hey guys, on my convertible there is a switch that rolls down all 4 windows, be it for opening the roof of just letting some air in. The problem is that When i pull the switch up, to roll all 4 up, only the 2 rear quarter windows roll up. I then have to pull the switch for either driver side and then the passenger side or other way round. Is there a way I get it so that pulling the "4 windows" switch will actually roll up all the windows like it is supposed to?
     
     

  2. Remove Advertisements
    BimmerForums.co.uk
    Advertisements
     

  3.  
    #2
    BMW Master
    Car Details
    gunslinger1's Car Details
    Model of Car:
    company car
    Year of Manufacture:
    company car
    Transmission Type:
    company car
    Car Body Type:
    company car

    Join Date
    Jan 2013
    Location
    midlands
    Posts
    351
    Thanks
    0
    Thanked 24 Times in 23 Posts
    sounds like your n/s/f and o/s/f windows have lost there one touch close function , you need to sync the front two windows , i would sit in the car with the ign on ,and both doors closed , wind the drivers window all the way down , and then hold the switch down for a few seconds , then power the window all the way up and then hold the switch in the up postion for 15 seconds , this should re activate your anti trap on that window . you will need to do the same with the front passenger window. the reason it does not work off the switch that drops all 4 windows , is that the general modul /ZKE cannot see where the window is as the hall sensor in the window motor is not syncronosed and does not know if the widow is at the top or bottom or half way up . i hope this is of some help .
     
     

  4.  
    #3
    Bimmer Fan
    Car Details
    nickaroo's Car Details
    Model of Car:
    330cd
    Year of Manufacture:
    2004
    Transmission Type:
    Manual
    Car Body Type:
    Convertible

    Join Date
    Jun 2012
    Location
    Bristol
    Posts
    8
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thanks for the reply. I tried what you said, but it didn't work. Still having the same problem. Is there any chance that the guy who bought the car new, had it specified to work the way it currently is?
     
     

  5. Remove Advertisements
    BimmerForums.co.uk
    Advertisements
     

  6.  
    #4
    Platinum BFuk Member
    Car Details
    johnny-c2's Car Details
    Model of Car:
    330ci
    Year of Manufacture:
    2002
    Transmission Type:
    auto
    Car Body Type:
    convertible
    johnny-c2's Avatar
    Join Date
    Mar 2010
    Location
    Burnley, Greater Lancashire!
    Posts
    264
    Thanks
    870
    Thanked 378 Times in 237 Posts
    Yes you can change what the windows do with what button mate, apart from one touch up on passenger window!
    Thanks button is here
     
     

Tags for this Thread

View Tag Cloud

Posting Permissions
  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts