I hope this is in the correct forum.
I am pulling my hair out with my remote key fob.
It is a brand new remote key fob with a new battery which has been charged on a week of long drives (2 hours at a time)
I coded they key fine using the standard instructions, all doors, boot and fuel flap open using the buttons, which all click and work fine.
However despite all this, my remote only works if I am right next to (0.5 meters) my car pointing it at the drivers side rear pillar.
ANYWHERE ELSE round the car and the remote simply does not work, let alone from any distance. Even standing at the drivers door the remote will not work.
Any help / tips / suggestions will be greatly appreciated.