I have a 2002 320d SE Touring and the rear passenger window appears to work in the oposite way to the others i.e. lift the switch to open and push down to close, this applies to both the front switch and door one. I took the door panel off today to check that the motor was not wired in reverse and everything looked normal. The other quirk is that if I hold the remote lock down for a few seconds (to close windows and sun roof, they all do as they should and close remotely except this rear window... it opens fully (it does the complete oposite to what it should do). I have tried reset by holding up/down the switch but no change.
Anyone know if this could be a fault with the general module? and if not what on earth could it be? the switches and motor are all wired correctly and the connectors all look fine. Help!