Ok i'm not good when it comes to technical and cars so this may sound a stupid question but i've learnt if i don't know somehting to ask. So did you have cruise control already and just added the multi function steering wheel or have you had to add actuators and other bits to get the cruise to work as it seems very simple to spend circa £50 and have full radio and cruise control by just adding the mutli functionsteering wheel. Sorry for my ignorance but i just don't know the answer.
Confused me when i first read about it - it appears all e46's that have fly by wire throttle control already have the required actuators installed and just need the MFSW and correct wiring loom to make it active.
Having carried out the retrofit i can confirm that this works
that makes it probably the best £50 or so i could ever spend on the car then, thank you for not laughing at the question lol.
so i tried to push the wire onto the pin just to test it works but car would not start. Took the wire out and all is well again
Does this mean that when i get the connector the cruise wont work? or could it be that the wire was not a good contact on pin?????
Many thanks for any help
im sure it was the correct pin but going to order the wire adapter monday and then try again.
Going to double check the wiring on the back of the light switch also as i just connected my loom wires to the same coloured ones without checking the pin numbers as it was arkward to see them.
Just hope it all works, at least the stereo buttons do
Ordered the wire adapter today!! Arrives wednesday
Didnt realise they light up, will try this later when its dark
|« Previous Thread | Next Thread »|