Hi all,

I have fitted aftermarket heated pads, with toggle switch, Im trying to fit oem switches. I can get the Asc switch to work and with a 9.5k ohm resistor on the temp wire i can get the switch to light up,

On the aftermarket switch i have 3 wires middle is power feed, left is power feed to the seat on low setting, right is power feed to the seat high power.

With the high power feed connected you can hear the relay clicking then the lights on the switch go out.

With the low power feed connected the seat warms up, could i use another relay to send the power down one feed (high) then press the oem switch and send power to the other feed (low)??

Getting there slowly, there has got to be away of using the oem as a switch,

Please help
Thank you