^^ yep thats the one the centre purple plug is for the central locking and the green one is for the door switches
I just need to figure out what colour wire from the alarm box connects to what colour wire in the purple plug etc. Would you connect the wires at the plug end?
You'll need to splice into the wires on the plug. Counting from the bottom right (pin1).
pin 4 is unlock and pin 13/17 is unlock.
Did you get a wiring diagram with the alarm instead of the list you put on page one? The diagram will be needed to know which wires off the alarm connect to the car and which ones will go to permenant 12v+ If you have then post up the diagram off the positive trigger system.
Thanks, I will scan it tomorrow and post it. Would I use all 6 wires for the central locking as the diagram points to? Yellow, yellow/black, white, wite/black, orange, orange/black?
You'd only use 4 wires from the six. Because the bmw is a positive trigger you'll have two wires from your alarm going directly to positive (you could solder them on to the main red 12v+ wire after the fuse) and out of the other two, one would go to unlock pin on purple plug and the other onto the lock pin.
Sorry I have quickly posted this while in work.....
The link above should take you to the wiring diagram that was sent with the kit.
No sorry that is all I got. I spoke to the company today and they have not been able to get any more info or diagrams. They have basically said I would have to look at the wiring diagram for the car and find out the correct colours and try to connect from there. I said that is all well and good but what wires do I connect to the correct colour car wires as there are 6 in total all stating connect to central locking - they didnt know
Hi all, some pictures from behind the dash and the wiring diagram I was sent with the kit. I hope someone can make more sence of it than I can. Regards Bill
|« Previous Thread | Next Thread »|